Case Mod My Glass & Steel Orange Graphite 600T

[Dave2010_TA]

No time to finish someone that ...
It's a lot that I'm mentally preparing and planning ... and I have not completely finished. But I'm so excited and I want to make share you my mod for the second time. This is my second mod. In this mod I will use mostly glass and steel: here too, as the 800D, the order of the day will be the total emptying the hdd cages, and everything else is "original" in the interior of the case. The steel structures will be used to "carriers" which support, precisely, the elegant glass panels.
This design is one that I'm still developing and is one that most fascinates me: indeed, I can recreate it at my leisure, the internal structure of the case, primarily to fit the HW and LCS, which I will integrate into mod.
This mod will not only aesthetic, but also performance and LCS & HW, aspects that I try not to be underestimated.
The hardware components and the LCS will be defined later, as they will reveal the various phases and aspects, which up to now I definitely planned.
Of course you know me, then, even in this mod, there will be many many upheavals, because I already know me and I'm very crazy.
In this period of my life is really the modding enjoy myself in a way such that I struggle every day not to think or what else to churn out new ideas to apply to the mod: I assure you that it is not easy then to realize all ideas, primarily because some are quite not "built", on the one hand, however, I have so many, I should take half a day each day of leave to be able to throw down some sketches.

However, passing to the point, the conditions are: I can tell you guys, expect a lot from your Dave!

As a first taste will put pictures of case covered by the mod to watch closely, that Corsair provide me kindly.

Sponsored by:

CORSAIR

COOLER MASTER

YBRIS COOLING

GIGABYTE




CRUCIAL

LET'S START!!

Good luck!! (to me)

[Dave2010_TA]

We continue to be otherwise you tell me that I'm not uploading enough (although not true).
A beautiful beast, kindly provided by Cooler Master, I thank him greatly, and especially one particular person.
I show you a nice roundup of photos of the beast that will give energy to the whole mod!

[Dave2010_TA]

Thank you guys!!!

Unfortunately in this last two weeks, I didn't make any design of my mod. However, on Saturday morning, I went to Ybris Cooling and I retired my order...with a seven near two zeros...and the game is made!
My wallet is still crying now...but my brain is very happy!!!
I show what I bought below. The liquid cooling system is not complete, and in the next weeks I'll buy the items to complete it!!!

[Dave2010_TA]

And these are the little boxes of the Alphacool's fittings...very few boxes hihihii!

[Dave2010_TA]

And to round off...A big thanks to Ybris Cooling, to give this beatiful waterblock!! The best waterblock in the world I think...BlackSun Extreme!!!

[Dave2010_TA]

Originally Posted by vite0150

I bought that case some days ago
Subbed!

Originally Posted by Mizugetsu

I loved your other build this is certainly exciting to see another corsair mod

Thank you very much guyzzz!!!!

[Dave2010_TA]

Mmm very very amazing things from Aquacomputer!!!!



























I don't remember that the Aquaero's bundle has the remote control...so I bought another...emmm....and now I have two remote control...
So, during the installation, I will show you the reason of each components.

[Dave2010_TA]

Mmm...this evening I think that will be an "orange" surprise...

[Dave2010_TA]

Originally Posted by Mankz

Moved to Modding section for the time being. When there is progress, I'll move it back.

What are you saying? I'm receiving and buying some parts of the mod, so in a few days I will start to work...I don't understand what you wrote. The project log contains the phase of show the components and the next phase to "build" the mod! I don't only show the parts, now I haven't receive all components...what do I mount or start to make?

[Dave2010_TA]

Originally Posted by Shurika

Orange... Interesting! I`ll watch

Originally Posted by Teelzebub

Nice boxes and bits, Arnt you supposed to post some work as well

Thank you guys!!
Teelzebub I don't understand you. Please, write well because I don't read and speak english very well.

[Dave2010_TA]

Thank you Gigabyte to give me this fantastic motherboard!!!!

[Dave2010_TA]

[Dave2010_TA]

Originally Posted by Mankz

Moved to Modding section for the time being. When there is progress, I'll move it back.

Excuse me I don't understand.
The modding section is for the ideas and components, and projects log for the work. Right?

[Dave2010_TA]

Originally Posted by Teelzebub

It's simple the rules state that the first post must contain some actual work for it to be in the log section not just endless pictures of the bits you are going to use.

Don't worry it will get moved back once you start some work on the build as stated by the mod

Project log rules link

http://forums.bit-tech.net/showthread.php?t=113985

Ok thank you very much, yesterday was a bad day for me, excuse me for my words you and Mankz. Thank you
Dave

[Dave2010_TA]

Thank you Mankz...what can I say...don't stop to follow my work!

[Dave2010_TA]

Mmm here there isn't enough suspense...I leave you now, with this words...

Your beautiful order is on its way to you ....

Who says this words usually??

Stay tuned!

[Dave2010_TA]

Finally I have time to post my materials. Today has arrived the sleeving from Mdpc!! Beatiful like always.
The news is the tool for crimping!! Very solid guyz!!
Stay tuned with the next update...as soon as possibile, I'll keep dremel in my right hand!!

[Dave2010_TA]

Aquacomputer has just informed me that they are sending me the last item that I missed ... waiting ...

[Dave2010_TA]

Yes, I love it!!

[Dave2010_TA]

Hello guys! Today I continue to show the others materials that I bought from Ybris Cooling. You can see on the left Ybris distilled water that I’ll need fot the graphic card’s loop; on the right you can see Mayhems Clean for the cpu+ram loop (cooled with passive radiators). The choice fell on Mayhmes precisely to the fact that having mixed materials (aluminum and copper) in the loop, it’s necessary to use a liquid that prevents and avoid galvanic corrosion.
I bought also the fantastic ModSmart’s PCI connectors, made by an amazing orange, perfectly the same colour of the tubes and motherboard.
Close to these connectors, you can found two T-connectors, two ball valves and two fillports, which placed on top of the case, allow me to fill easily the two tanks. You can see also four led stripe long 60 cm and six long 30 cm of Phobya and another top for Laing since the last time I took only one.
You can also note the little packets of orange leds already coupled with resistances, over the PCI connectors. I’ll use these leds to replace the original leds of the 200 mm fans.
But let's talk of the passive radiators: as you well remember (I hope hihi) I have already bought the passive of Alphacool, named Cape Cora.
When I bought the others passive radiators I didn’t realize that they aren’t thread. The problem is that if I try to thread them, I’ll lose the anodization, and the galvanic corrosion would occur immediately.
So, without becoming discouraged, I bought six individual elements, threaded 1/4GAS for both sides of course, and I'll use these. The only drawback is that they are gold, and then I’ll give a good painted with the paint suitable for radiators, so that it will not adversely affect the heat exchange with the external environment.