bit-tech.net

Go Back   bit-tech.net Forums > Modding > Project Logs

Reply
 
Thread Tools View Mode
Old 6th Oct 2012, 18:13   #1
Phame
Hukkel's sex slave
 
Phame's Avatar
 
Join Date: Sep 2012
Location: London
Posts: 250
Phame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpit
*Orange and Black!* - Big old update guysszzz!! 05/11/12


Hey guys and gals,

I see a hell of alot of amazing work on these forums from modders with ingenious ideas , and I hoping my build lives upto the high standard of others.

Anyway this is my new project!

Hardware:
CPU: Intel i7
Mobo: Gigabyte X58A-OC
RAM: 24GB Corsair Dominator GT
GPU: 2 EVGA 580s



Design/CAD





Still need to model up the cards and other mobo bits.

---------------------------------------------------------------------------

While I am currently working on the design I have been getting most of the components ready.

Strip back the stock coolers ready for EKWBs to arrive which should be early part of next week.











I started to straighten up the rad fins and prepare it for a lick of paint.





Will let it dry and post pictures when I paint it orange.

PLEASE NOTE: I am rubbish with photographs (as you can see) so please bare with me!

I will update as much as I can.

Regards

Phame!

Last edited by Phame; 5th Nov 2012 at 23:09.
Phame is offline   Reply With Quote
Old 6th Oct 2012, 18:20   #2
AciD_RaiN
Multimodder
 
AciD_RaiN's Avatar
 
Join Date: Jul 2012
Location: Iceland
Posts: 150
AciD_RaiN can run CrysisAciD_RaiN can run CrysisAciD_RaiN can run CrysisAciD_RaiN can run CrysisAciD_RaiN can run CrysisAciD_RaiN can run CrysisAciD_RaiN can run CrysisAciD_RaiN can run CrysisAciD_RaiN can run CrysisAciD_RaiN can run CrysisAciD_RaiN can run Crysis
I like what I'm seeing I use the same method to paint my radiators :P
AciD_RaiN is offline   Reply With Quote
Old 6th Oct 2012, 18:23   #3
Phame
Hukkel's sex slave
 
Phame's Avatar
 
Join Date: Sep 2012
Location: London
Posts: 250
Phame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpit
Quote:
Originally Posted by AciD_RaiN View Post
I like what I'm seeing I use the same method to paint my radiators :P
Thankyou duuuude..

I have just noticed the thread title, it should be Orange and Black.

Do you know how I can change it?

Regards
Phame!
Phame is offline   Reply With Quote
Old 6th Oct 2012, 18:32   #4
Metrodusa
Minimodder
 
Metrodusa's Avatar
 
Join Date: Jan 2012
Location: Ljubljana
Posts: 39
Metrodusa has yet to learn the way of the Dremel
Quote:
Originally Posted by Phame View Post
Do you know how I can change it?
There should be an "Edit" button somewhere in your post, in the bottom part, if I'm right.
Metrodusa is offline   Reply With Quote
Old 6th Oct 2012, 19:07   #5
Teelzebub
Up yours GOD,Whats best served cold
 
Teelzebub's Avatar
 
Join Date: Nov 2009
Location: Culloden / Hell
Posts: 14,720
Teelzebub is a Super Spamming SaiyanTeelzebub is a Super Spamming SaiyanTeelzebub is a Super Spamming SaiyanTeelzebub is a Super Spamming SaiyanTeelzebub is a Super Spamming SaiyanTeelzebub is a Super Spamming SaiyanTeelzebub is a Super Spamming SaiyanTeelzebub is a Super Spamming SaiyanTeelzebub is a Super Spamming SaiyanTeelzebub is a Super Spamming SaiyanTeelzebub is a Super Spamming Saiyan
Quote:
Originally Posted by Phame View Post
Thankyou duuuude..

I have just noticed the thread title, it should be Orange and Black.

Do you know how I can change it?

Regards
Phame!
Click on Edit and then advanced you will be able to edit the title then
__________________
Watch this space

Mountain mods case, Enermax 1250w PSU, Asus Maximus V Extreme, i7 3770k @ 4.6ghz, Samsung 840 250gb SSD. 500gb Seagate,Corsair H80i wind tunnel, 16gb Corsair Vengeance pro 1866mhz,4xEVGA GTX 670 quad SLI 2 x Dell U27" @ 2560 x 1440, 4 bags of weed
Teelzebub is offline   Reply With Quote
Old 6th Oct 2012, 19:11   #6
Phame
Hukkel's sex slave
 
Phame's Avatar
 
Join Date: Sep 2012
Location: London
Posts: 250
Phame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpit
Thankyou guys, feel better about it now!
Phame is offline   Reply With Quote
Old 8th Oct 2012, 17:36   #7
Phame
Hukkel's sex slave
 
Phame's Avatar
 
Join Date: Sep 2012
Location: London
Posts: 250
Phame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpit
Small parts update as I am still modelling up the motherboard, and how to run the tubing.
I have also added some of the components logos that I will laser in with the rest of the cable holes, they will be backed with perspex and have LEDs set into it Orange and White... Let me know what you guys think?



Nice packages arrived aswell..
Made myself alittle l3p ram castle.
Red heatsinks will be removed for the waterblock, as it doesn't really fit in with my colour scheme!





These arrived from EKWBs also...







And this man needs no introductions...





A very bright orange!

More build updates soon! Might start sleeving the PSU now..

Regards
Phame!
Phame is offline   Reply With Quote
Old 8th Oct 2012, 18:08   #8
Mcbeer
What's a Dremel?
 
Join Date: Apr 2012
Location: Ribe, Denmark
Posts: 10
Mcbeer has yet to learn the way of the Dremel
Looks very cool indeed!
The black/orange is a lovely theme, almost went with it for my upcomming build.
AS a CNC machinist you should have made your own blocks tho
Looking forward to seeing more from you. The case design looks cool
Mcbeer is offline   Reply With Quote
Old 8th Oct 2012, 21:10   #9
Phame
Hukkel's sex slave
 
Phame's Avatar
 
Join Date: Sep 2012
Location: London
Posts: 250
Phame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpit
Quote:
Originally Posted by Mcbeer View Post
Looks very cool indeed!
The black/orange is a lovely theme, almost went with it for my upcomming build.
AS a CNC machinist you should have made your own blocks tho
Looking forward to seeing more from you. The case design looks cool
Thanks man I hope it turns as well as I have planned.. I will be making a northbridge and southbridge block but the machine is on production and I will be running it for the next couple of months, Will be getting a 5 axis CNC and 5 axis laser after that.. So im really looking forward to that!
Phame is offline   Reply With Quote
Old 12th Oct 2012, 11:16   #10
Phame
Hukkel's sex slave
 
Phame's Avatar
 
Join Date: Sep 2012
Location: London
Posts: 250
Phame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpit
Hey got a small update for you, unfortunately we have been very busy at work and I was unable to get on the laser to do my 'homework', I now have a free weekend which I can jump on there and get my blanks cut out.

I spent alittle time developing out the main front panel as I have only got enough 2.0mm Aluminium to have one go at it, if not I need to order some in and we don't want to waiting any longer!





I had to adjust the blank by 0.2mm because I was alittle shy on my working out.
I have now added it and made amendments to the laser program.

Meanwhile I had a little time to finally paint the Rads, although I asked for Electric Orange..
It turned out more 'Golden'!





Not really what I wanted.. So need to get some proper Orange and have a word with them about there colour codes..

Ive also put the water blocks on the RAM and GPUs..





The CPU will have to wait as I have to laser a custom backplate as I feel the one they gave me is rather ugly!

More soon, and sorry for the small update!

Phame
Phame is offline   Reply With Quote
Old 19th Oct 2012, 18:34   #11
Phame
Hukkel's sex slave
 
Phame's Avatar
 
Join Date: Sep 2012
Location: London
Posts: 250
Phame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpit
Hey,
Sorry haven't really posted to often been difficult, to much on!

I have bought some Corsair SP120 Fans for my Rads..





I've painted the white rings Orange and the side of the Rad..









I'm liking it alot!!

I had a chance to jump on the laser and quickly cut the the CPU backplate.. This is what I came up with...





Here it is installed...



Stole this idea from L3P, thanks dude good thinking!!!





I drilled the holes out to 4.7mm for my capheads..





Then buzzed the ends off with the bandsaw..





Had to mill off some off the heatsink fins for it to butt up against the RAM waterblock..



Done!



Wouldn't really fit with the colour scheme if the are RED now would they

Gave them a little lick with the can..







I also did the top of the CPU tensioners..

Thanks for looking guys..

Peace out

Phame
Phame is offline   Reply With Quote
Old 21st Oct 2012, 15:46   #12
l3p
www.^.nl
 
l3p's Avatar
 
Join Date: Nov 2010
Location: Netherlands
Posts: 723
l3p is the Cheesecake. Relix smiles down upon them.l3p is the Cheesecake. Relix smiles down upon them.l3p is the Cheesecake. Relix smiles down upon them.l3p is the Cheesecake. Relix smiles down upon them.l3p is the Cheesecake. Relix smiles down upon them.l3p is the Cheesecake. Relix smiles down upon them.l3p is the Cheesecake. Relix smiles down upon them.l3p is the Cheesecake. Relix smiles down upon them.l3p is the Cheesecake. Relix smiles down upon them.l3p is the Cheesecake. Relix smiles down upon them.l3p is the Cheesecake. Relix smiles down upon them.
They look lovely
Everything does!
__________________
Finished : Raz3r D3sk - L3p Parvum - Cross - L3p AlCu - L3p L4n - L3p D3sk
Sites: www.l3p.nl - www.facebook.com/l3p
l3p is offline   Reply With Quote
Old 21st Oct 2012, 16:29   #13
Mankz
________
 
Join Date: Jan 2006
Posts: 13,587
Mankz is definitely a rep cheat.Mankz is definitely a rep cheat.Mankz is definitely a rep cheat.Mankz is definitely a rep cheat.Mankz is definitely a rep cheat.Mankz is definitely a rep cheat.Mankz is definitely a rep cheat.Mankz is definitely a rep cheat.Mankz is definitely a rep cheat.Mankz is definitely a rep cheat.Mankz is definitely a rep cheat.
Loving the attention to detail
Mankz is offline   Reply With Quote
Old 21st Oct 2012, 23:38   #14
Phame
Hukkel's sex slave
 
Phame's Avatar
 
Join Date: Sep 2012
Location: London
Posts: 250
Phame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpit
Quote:
Originally Posted by l3p View Post
They look lovely
Everything does!
Thanks man, glad your liking it!

Quote:
Originally Posted by Mankz View Post
Loving the attention to detail
Cheers Mankzzzz!

Hopefully start the case this week..
Phame is offline   Reply With Quote
Old 5th Nov 2012, 23:08   #15
Phame
Hukkel's sex slave
 
Phame's Avatar
 
Join Date: Sep 2012
Location: London
Posts: 250
Phame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpit
So its been a while since my last update.
This one is pretty big with lots of nice piccies..

Managed to squeeze my stuff on to the laser as the boss had a couple of days holiday..





Added the hank bushes to screw the backplate on..











I made the baseplate PSU grill to complex, the grills where to thin and kept burning away..



And after that changed my mind and made a grill out off some nice stainless grill so I am going to use that.

This is the back plate that has the removable cover and 360 rad mounted to it..



Started tac'in the case together, im not aluminium welder(As you will see).. Stainless is my forte!





















Bent the front main panel and tac'd that onto the sides and back..













Did some stitches about an itch long in a few places..











Fully welded it all up with very little distortion which I was surprised about, but with a lot of small stitches it worked out!!

Folded the CD Drive bracket..



















Made a quick joggle tool out of some scrap behind the guillie..







Damn .02 out!



Wanted to have my logo 'smoked' onto the side perspex windows.
So had a little think..

Cut out my logo on the same size piece of mildsteel that I can just overlay onto the perspex..
Ofcourse I did a test piece on some old perspex!!



Stuck it in the shot/sand blaster and fired away!! Only took a good 3 second!! And...

Success!!





I have added another 580, so had to make a new slot for the mini HDMI to run through the case..







And also another HDMI panel port..



I made a stupid mistake and was pretty much
The mini HDMI to HDMI cable for my graphics cards have some bumb near the end..(Hard to explain heres a photo..)



There is a scratch in the part I am talking about.. So they wouldn't go through my slots I had designed!!



Quick file got rid of it but didn't like having to do it!!

Also had to make a frame to house the perspex windows..







Here is a look at what look I am trying to achieve..





Taken on another idea and it involves these..



Now have to make a wall mount and floating desk and find room in the gaff for it to fit!!

Sorry for the big update!

Case should be ready for the powder coaters soon! Nice low gloss black is what im going for..

Will update when I can guys..

Phame is offline   Reply With Quote
Old 6th Nov 2012, 07:18   #16
Vetalar
*learning english*
 
Join Date: Jun 2011
Location: Gomel, BY
Posts: 482
Vetalar has yet to learn the way of the DremelVetalar has yet to learn the way of the DremelVetalar has yet to learn the way of the Dremel
c'mon man! 5MP update! my connection at work not that good!
great project BTW
__________________
10 re-plan "SuperBestBuild Of My Dream"
20 have a sleep
30 goto 10
Vetalar is online now   Reply With Quote
Old 6th Nov 2012, 18:25   #17
KrunchR
Supermodder
 
KrunchR's Avatar
 
Join Date: Apr 2008
Location: Nottingham,England
Posts: 329
KrunchR is almost as Godly as yodasarmpitKrunchR is almost as Godly as yodasarmpitKrunchR is almost as Godly as yodasarmpitKrunchR is almost as Godly as yodasarmpitKrunchR is almost as Godly as yodasarmpitKrunchR is almost as Godly as yodasarmpitKrunchR is almost as Godly as yodasarmpitKrunchR is almost as Godly as yodasarmpitKrunchR is almost as Godly as yodasarmpitKrunchR is almost as Godly as yodasarmpitKrunchR is almost as Godly as yodasarmpit
Great progress. Lovely welds. This is gonna be cool.
KrunchR is offline   Reply With Quote
Old 6th Nov 2012, 19:34   #18
Phame
Hukkel's sex slave
 
Phame's Avatar
 
Join Date: Sep 2012
Location: London
Posts: 250
Phame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpitPhame is almost as Godly as yodasarmpit
Quote:
Originally Posted by Vetalar View Post
c'mon man! 5MP update! my connection at work not that good!
great project BTW
Thankyou..
Sorry about that dude, I might resize the images when I get time..

Quote:
Originally Posted by KrunchR View Post
Great progress. Lovely welds. This is gonna be cool.
Cheers fella, I hope so too!
Phame is offline   Reply With Quote
Old 6th Nov 2012, 19:46   #19
elAwesome
Multimodder
 
elAwesome's Avatar
 
Join Date: Nov 2012
Location: Zuich, Switzerland
Posts: 214
elAwesome is a hoopy frood who really knows where their towel is.elAwesome is a hoopy frood who really knows where their towel is.elAwesome is a hoopy frood who really knows where their towel is.elAwesome is a hoopy frood who really knows where their towel is.elAwesome is a hoopy frood who really knows where their towel is.elAwesome is a hoopy frood who really knows where their towel is.elAwesome is a hoopy frood who really knows where their towel is.elAwesome is a hoopy frood who really knows where their towel is.elAwesome is a hoopy frood who really knows where their towel is.elAwesome is a hoopy frood who really knows where their towel is.elAwesome is a hoopy frood who really knows where their towel is.
Stunnig work so far!
I definately wanna see more
elAwesome is offline   Reply With Quote
Old 8th Nov 2012, 12:44   #20
jinq-sea
#BBERG
Moderator
 
jinq-sea's Avatar
 
Join Date: Oct 2012
Location: London, UK
Posts: 4,669
jinq-sea is a Super Spamming Saiyanjinq-sea is a Super Spamming Saiyanjinq-sea is a Super Spamming Saiyanjinq-sea is a Super Spamming Saiyanjinq-sea is a Super Spamming Saiyanjinq-sea is a Super Spamming Saiyanjinq-sea is a Super Spamming Saiyanjinq-sea is a Super Spamming Saiyanjinq-sea is a Super Spamming Saiyanjinq-sea is a Super Spamming Saiyanjinq-sea is a Super Spamming Saiyan
Love it. All these cool projects have inspired me. Maybe I'll create something in the new year (although I no longer have a workshop - I'll have to blag my Dad's!)
jinq-sea is offline   Reply With Quote
Reply

Thread Tools
View Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 00:59.
Powered by: vBulletin Version 3
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.