12th Jan 2013, 07:03
|
#1 |
|
Hypermodder
Join Date: May 2006
Location: Cologne / Germany
Posts: 661
  |
Stark PC 7 HX
Hy @ all
this is our entry for the Lian Li PC 7H Contest, i know itīs already close to the deadline...but lets see what we can do with it in the hurry of time.(2 weeks) First the unboxing & disassembling....       after that we started to make the first prototype of the sidepanels...  then we started to work on both sidepanels....   and the 2nd sidepanel....  after cutting out the first parts out of the sidepanel....we made the next prototypes ....this time.... a few Fan/Radiator Grills....     as next, we made a grill for the 2nd sidepanel...(maybe we will make the final version a bit smaller than the prototype)   then we made a few parts for the front...just to figure out in which combination we?re going to use them later...    after that we started to print out the first part which will be used on the front of the case....   beside that we made a few smaller preparations ...like cutting out a few mesh stripes and things like that... (the mesh will be used behind the stark industries logos....)   (both stripes will be sanded, so that we get rid of those anodizing...) |
|
|
|
12th Jan 2013, 08:51
|
#2 |
|
Beyond Complexity Lies Simplicity
Join Date: Feb 2011
Location: Boxtel The Netherland
Posts: 539
|
NICE !!!!
Good luck on the compo!
__________________
Current Build : BORG COSMOS II Current build : 2001 - A Case Modyssey Finished build : IMPERIAL AT-AT Finished Build : USS EURISKO - Intrepid Mark II Class www.asphiax.wordpress.com |
|
|
|
|
12th Jan 2013, 09:37
|
#4 |
|
Fenrir The Wolf
Join Date: Dec 2011
Location: Sisak,Croatia
Posts: 930
|
Seems as good start of an epic build.
|
|
|
|
|
12th Jan 2013, 10:23
|
#5 |
|
Multimodder
Join Date: Aug 2004
Location: Somewhere :D
Posts: 104
|
It's gonna be a great project
|
|
|
|
|
13th Jan 2013, 16:58
|
#6 |
|
Hypermodder
Join Date: May 2006
Location: Cologne / Germany
Posts: 661
|
thanks a lot m8īs!!!
in the last days we continued the work on the case....first we started to sand down the anodizing of the mesh pieces....    then we added a first layer of paint on the printed frame for the front....  then we put it in itīs place, so that we could take a few measurements for the next parts...  after getting all the informations we needed, we could print out those "A" Shaped pieces and make a first prototype of a frame for the front....  and last but not least we started to cut out the first frames and grills out of metal...  
|
|
|
|
|
16th Jan 2013, 05:07
|
#7 |
|
Hypermodder
Join Date: May 2006
Location: Cologne / Germany
Posts: 661
|
time for the next update:
in the last days we continued to prepare all parts which are needed to continue the work on the outside of the case....         
|
|
|
|
|
16th Jan 2013, 06:48
|
#8 |
|
Multimodder
Join Date: Oct 2012
Posts: 84
|
looking good mate
|
|
|
|
|
16th Jan 2013, 19:33
|
#9 |
|
↓ Don't trust that face!
Join Date: May 2007
Location: Texas
Posts: 6,976
|
I like that you have 3d printing now, but it seems odd to print a 2.5d part with it. Kinda like buying a Ferrari and driving 30.
__________________
|
|
|
|
|
17th Jan 2013, 05:47
|
#10 | |
|
Hypermodder
Join Date: May 2006
Location: Cologne / Germany
Posts: 661
|
Quote:
, yeah youīre totally right....buuuut we have it only for a few weeks now (i think 2 or 3) and we are still experimenting with the right settings etc. so weīre just happy that we got it working that far....everything else (like full 3d printing) comes later when we know better what we do and now, itīs time for the next update: yesterday we couldnīt make that much progress as we wanted...so we have a tough programm scheduled for today....but i think we will finish it on time...:up: we already prepared the next metal / plastic pieces which are needed to finish the outside...beside that we already started to prepare the hardware to be moved in...              
|
|
|
|
|
|
17th Jan 2013, 23:45
|
#12 |
|
Keep calm & mod on. =)
Join Date: Aug 2009
Location: UK
Posts: 4,539
|
Awesomeness in a 2 week mad dash modathon.
|
|
|
|
|
18th Jan 2013, 03:29
|
#13 |
|
Hypermodder
Join Date: May 2006
Location: Cologne / Germany
Posts: 661
|
thx m8īs!!
@Editor22....yes itīs only the cooler/pump/res...but weīre hoping that it will perform well with a good 2x120mm radiator in the loop.... time for the next update: yesterday we prepared all the plexiglas pieces which we need to assemble everything on the case .... we also made the last cuts into the 2nd sidepanel....            
|
|
|
|
|
19th Jan 2013, 05:22
|
#15 |
|
Hypermodder
Join Date: May 2006
Location: Cologne / Germany
Posts: 661
|
thx m8!!
time for the last update: (during the contest...i think we will work on a few details later...),,,                    
|
|
|
|
|
19th Jan 2013, 13:12
|
#16 |
|
theorycrafting
Join Date: Feb 2006
Location: Finland
Posts: 2,533
|
There he strikes again. Another quality-mod from thechoosen
Could you tell us more about the CM Eisberg? How does it perform?
__________________
...and allways remember, that the world is an orange!
Define Mini Black [Gigabyte Z77MX-D3H | intel i5-3450 | Kingston HyperX DDR3-1600 8GB | Gigabyte GTX660OC Windforce2 | intel 330 120GB | WD AV GP 1TB] |
|
|
|
|
26th Jan 2013, 04:03
|
#17 | |
|
Hypermodder
Join Date: May 2006
Location: Cologne / Germany
Posts: 661
|
thx m8!
Quote:
We run it with the resistor cable attached so that the pump is running really silent....a little bit louder than a Laing Pump but really not much. I think we will run a few benchmarks in the next days...then i can tell you more about the performance of the Eisberg.... Finally the Voting for the Lian Li Contest has gone Live...and here is a link to it... |
|
|
|
|
|
26th Jan 2013, 07:02
|
#18 | |
|
Car lover and Speed Junkie
Join Date: Sep 2012
Location: USA rep: 1,385,526 (Greatness)
Posts: 807
|
0_0 finally a build name stark themed after its name! confusing relief..
Fast log, but good god the best looking yet!
__________________
Quote:
 I *am* the guy who loves too many threads to bump them all. |
|
|
|
|
|
26th Jan 2013, 07:26
|
#19 |
|
Need help with scratchbuild!
Join Date: Dec 2012
Location: Berkshire
Posts: 710
|
Looks amazing and great theme idea.
I never knew the cm eisberg came as just a res/pump block, may have to use one in future projects.
__________________
i5 3550 // gigabyte g1 sniper m3 // xfx 7950 dd @ 1ghz // 2x4gb C. Vengeance // samsung 256gb 830 // 750gb scorpio black // silverstone tj08be // enermax ets t40 tb // ocz modXstream pro 700w // Dell u2412m // IBM 17" tft. Xbox PC mod (nearly finished): a10 5800k @ 4.6ghz, h100i, msi fm2 a75ia, 8gb samsung greens, 256gb sandisk ultra!
|
|
|
|
 |
| Tags |
| babetech.de, bt-custompc.de, casemod, lian li, stark pc 7 hx |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| View Mode | |
|
|
All times are GMT. The time now is 07:34.
Powered by: vBulletin Version 3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Powered by: vBulletin Version 3
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
