Scratch Build – In Progress little Worker - Enermax Contest [update: some final pics for the contest...240813]

Time for the next worklog

At the moment we´re competing in that Enermax & We-mod-it Casecon Contest so it´s time to start a new worklog for it....

Our plannings for this build were really raw, because we choose to develop it during the building process....we have a raw idea in which direction we´re heading but we didn´t made much sketches, 3d renders or something like that....

This build will mostly be made of aluminium and it will be watercooled....but everything else....we will see....


Ok, i have to admit....we did a sketch ....pen & paper and really raw...but thats the only sketch we did up to now.... and it was only done so that my brother could easier explain his idea to me....



after making this piece of art we started to cut out the mainboardtray....










beside that we also cut out a few sheds which we will use for the front of the case...

 

time for the first update

but before i start....we wanted to send a thank you!! to Aquatuning & Enermax for their support in this contest!!





As next we started to disassemble the radiator....after that we marked all parts...so that all parts could loose a bit of length.....







beside that we bended the first sheds in the form we need them ....

 

time for the next update:

after cutting down all parts from the radiator to the right length we started to build a base frame for our build....

 

Looks really great! Keep up the good job!!

Reminds me one of Zesti's projects

 

thanks a lot m8!
i didn´t see the log of Zesti before, but after scrolling through the pages ...i really like it & hope that he will finish it!





We have a new little supply of pics for you...
In the last days we overworked the radiator parts a little more....beside that we also prepared a plate on which we can mount all parts of the radiator. But before we started to work on the radiator again, we first finished the next pieces of the base frame so that we could mount it for a first test....

 

Some nice metalwork right there!

 

I love your Idea to round off the rads.

 

Nice metal skills. subbed

 

The rads look pretty damn awesome with rounded ends, overall project is looking mighty fine too.

 

thanks a lot!!!

time for a few new pics....
in the last few days we only worked on the front of the case and already made the raw frame in which we will attach the prepared sheds...

 

Always nice to see your mods/projects.

 

thanks m8!!!

Time for a small update

In the last days we recycled an "old" ATCS Sidepanel, first we disassembled the parts which are used to mount it on the chassis and after that we used the rest of the aluminium as a next layer for our project

 

time for a small update:

we couldn´t make much progress in the last days, because we were busy finishing the 666 Project, but we managed to cut out the first layer of the sidepanel and we also started to polish the front sheds....

 

It´s time for the next status update:

In the last couple of days we made a lot of those little things like drilling holes, countersinks, thread cutting...etc...

Beside that we also cutted the front sheds to the right length and prepared the next sheet of metal, which will be used inside the case.....

As next we´re going to continue with the top and bottom of the case so that we could speed up the building process a little bit...

 

time for the next update:
in the last days we cut out the top and bottom panel (bottom panel is only a first raw cut....cut outs for fans will folllow)
beside that we prepared an inner frame on which we could mount the inner sidepanels...

 

This is the stuff I love to see, inspiring work, makes me anxious to start my next build!

 

I love what you did with the radiators. Everything else is sweet too.

 

thanks a lot!!!


Time for an update again

In the last days we continued the work on Top & Bottom, first we cut out the holes for the fans and made everything necessary to mount the fans on the bottom panel, then we started to make a grill for the top of the case which matches the look of the front....

We also started to build the reservoir for the watercooling loop and we painted the first parts....

 

this build is freaking awsome !

 

time for some final pics to end the contest........therefor without a lot of words....pictures.....