Case Mod - In Progress Project: Blue Flames - Case Finish

Those sleeving kits are good, the AC Ryan sleeve is very good quality I have found. Does it come with the pin removal tools?

 

@ The boy 4rm oz nice kit and all come with 2 pin removal tools

The kit is arrived Tuesday i will thanks my friend Stany to pickup this kit for me.
No update just simple picture from the new kit from A.C.Ryan the morf psu modding kit in black.

The packaging



The whole kit open



I will start this week-end by change my molex and add the flexsleeve.
Happy modding

 

You really do get a lot with those kits.

 

@ The boy 4rm oz thanks il will do my best

I start this week-end to change most of my cables.
Start with the cables of the card reader i need to separate them before start sleeving.



after



I did the same with the other cables



Remove molex


add black sleeving and add molex


The 2 finish


The molex


Start to remove the sleeving from the 120mm case fan.

Before


After


That's all for today i need to order some molex and fan connector because all need to be in black

Happy modding

 

Good job with that sleeving, I don't think I've ever had the paitence to sleeve in the entire time I've been modding. Keep up the good work.

 

Thanks Inf3ction the first did me crazy but after that it was no more a problem

 

Yeah I find sleeving as a chore but you do get good results. Nice work.

 

Happy new year to all

I apologize me for the slow update but after a heart infection I stayed in bed for couple of day's but now all okay

But lets start this new year with a new Mini update

I have order new parts for the mod.
Female and male molex to finish the cables all black of cours



also new sata cable from Ac-ryan



Next a new ide cable for the DVD and the data hard disk



I have order on the same time Blue UV painting but do not now if i will use this



I have install the last molex



The 6 last pictures are take with my new EOS 450D camera i love it.



Next time i will install the motherboard and connect all cables

Thank and happy modding

 

Happy new year to you too and hope your health is fine.

 

+1 to that.

 

Thanks Loom its not 100% good but its on the good way

Thanks The boy 4rm oz

 

Installed Motherboard

Back to update

I have start to installed the motherboard in the case.
Just a little reminder from the hardware that i use.

The motherboard is an asus Maximus Extreme with the CPU Intel Q9450



The CPU cooler is an Thermalright Extreme 120



The fan on this cooler will be an sharkoon Silent eagle 2000



I use the MX-2 thermal compound for the CPU



But let my start to mounted the CPU fan on the motherboard
First add thermal compound to the CPU



Install the great Cooler



The rear view of the motherboard with the cooler plate in black



An global view



Before i installed the motherboard in the case i need to install the back plate from the motherboard



View from the rear view



and now all installed in the case



other view




the motherboard is install and now i can start the installations but that's for the next update

thanks Nolimited

 

Lookin sweet so far, wires look much better sleeved =o)

 

Update

@ CobraMods thanks i find also

Update Time

I start with the installation of the memory on the motherboard

2 x 2GB DDR XMS3 that will be nice



Install done. I don't find them in black



I will also install this sound card on the motherboard



Next the video card i now it is and EN9800GTX but not so bad when i read the reviews and i buy this when i start this mod



View from all install sound and video



Another view



View from an other angle



Next start connect the power, reset and the hd led on the motherboard.

This is the view with the cable not connect just insert to see how it like.



Zoom on the connectors (jacks)



I start the sleeving of the power, reset and HDled cables not easy they are very short



I forgot to take a picture from the cable finish but in the next view you will see the cables when i take a test to see that all works.



i test to see that all works and yes first the start button i like it



The HDled work also youpy



And the 2 on the same time i love the blue color



and in the dark



I will start this week-end the lights in case and see to set all the cables like i want.

Sheers and until next update Nolimited

 

Thanks for the update, esp on the cable jacks! Those are too cool Nolimited.

 

Very good.I like the cover for the drive cage.

Only one suggestion.You should turn the exhaust fan (clear) so that it pushes air to the outside of the case.I think you could get lower temps that way.

 

What he said.

 

I agree with Spyrious, turn the rear fan around and make it an exhaust. That way all the hot air coming off the TRUE will be expelled.

Looks fantastic though mate, Excellent work of the jacks for the front header cables.

 

@mnpctech thanks i appreciate

@Spyrious thanks for the tip i change them (new pic )

@Loom thanks Mate

@The boy 4rm oz Thanks tips are every time welcome and appreciate

 

Update Cables

Back for update.

I take a picture from the jacks because forgot the last time i also start new sleeve cables



I start to sleeve the audio cable and the cables of the mini CCFL kit

Audio cable before



Audio cable after



CCFL cable before



CCFL cable after




Once the cables off the CCFL kit are finish i install the cables and the button for the lights
Two buttons one for the inside an the other for the top and bottom lights.



Complete view off the rear of the case



some picture from the inside with the cables install




I make some light test i love it







80% are finish now i need to install all and make some test to see that all works
Also make some final touch
Happy modding to all