Case Mod - In Progress Project: Chocolate Temptation-Update 4 June - I have got Sick & Facebook Page!

Thanks to your worklog i discovered paracord
I just wanted to ask, if you know where to buy these in Europe, I'm having hard time finding some (i really like the colour range, can't find that many in MDPC-X for example)
Does your sponsor send to other euro countries?

I'm looking for some specific colours.... hope you can help me

 

Ebay

 

Woot, thanks
Didn't check there, was expecting some modding shop instead

I just ordered some samples from the states to decide which colours i will finally choose and then will place the final order from ebay

 

Im very glad to hear that...yes my sponsor sends out from sweden too, just visit www.knivbutik.se, then search för paracord

yes that is an option too !

You can find anything at ebay ,! good , what colors are u after ?

 

I will ask at knivbutik aswell, maybe he can get the colours i need!
I just ordered samples (25ft of each) directly from the States so i can decide which colours suit my needs.

I'm after some "gold" looking colour, and i checked a lot of pictures, and finally decide to choose between Coyote Brown, Coyote Tan, Desert Tan and i think i ordered some other that could work

Have you used Heatshrink with paracord before? I know you are not using it for this build, but just wanted to make sure which size of heatshirnk to buy.
I've read that 3:1 but not sure about diameter for both.

It is possible to sleeve Sata with paracord 550 aswell? Otherwise i will have a hard time looking for Sata sleeve that match my Paracord

 

you can see all the paracord he has here

http://www.knivbutik.se/19-paracord-fallskarmslina

he maybe doesnt have that mutch than what you could find on ebay but he has som colors and mixes , yes i have... its the 4:1 heatshrink that everyone uses ... i dont know if there is any paracord och nyloncord that is that thick :S, i havnt seen it tyet thow :/, im searching like hellt for some brown

 

There will be another uppdate tomorow ! will do some soldering and sleeving aswell!

 

I love mini-ITX build, I'm planning another one myself right now. Yours looks great, I'll be watching your progress

 

its fun to hear that!

Thank you , dont forget to subscribe!

 

How easy is it to sleeve cables with the paracord vs. the MDPC-X type sleeve? I've heard paracord attracts and shows dust but, it is considerably cheaper and it does look pretty nice. And, MDPC sleeve is hard to get in the states :S

 

Hi dude!

its like two times harder...or let me say this it takes almost two times more to sleeve with paracord... and paracord does not attract dust , yes its cheap and it looks so great! So you have plenty of reasons to buy and try ;D

 

Today I will announce a new online webshop which has become one of the new members in my Sponsor Family!



There is no more than the wonderful web shop SpecialTech who will sponsor me with:
1x Hardware Labs Black Ice ® GT Stealth 120mm Single X Flow RadiatorBlack
1x Hardware Labs Black Ice ® GT Stealth 240mm Radiator XFLOW
1x 500 x 500 x 1mm Brushed Aluminium Panel: Gold
4x Neoprene Rubber Edging Trim (1m)
1x Tubing Cutter
1x 500ml Squeezy Bottle for filling Water Cooling Systems
1x Koolance 1 / 4 "Thread Male to Male Coupling Adapter Black
1x Bits Power Mesh Radgard 240 Dual Radiator Black Grill
1x Power Bits 1 / 4 "Thread T Universal Fittings Matt Black

I thank Adrian very much for his interest and support for me in my project!

 

Yah, Adrian rocks!!!

 

He is awsome !

 

Now I've finally got some time left to make an update to the people

But before I show you something I want to throw up two pictures of Isoprypanolburken I got me away from Arthur, and something I bought my way home from work at Kjell & CO(swedish allround electronic store)





1.8mm 6-7000K Vwhite LED




What I did is that I have had time to finish the whole pump, what is done with it is;
-Soldered of the original cables
-Soldered on a new 3pin cable (complete with contact pins, etc.)
-Sleeve the cable
-Modded it with the POM-Top
-Tested it, and it worked great!

Work and finished result pictures, it is a bit dark when I was working around 2-3:00 in the morning ... then i would not wake everyone in the house so i used a desktoplamp.









Sleevetime, this is my technique at Sleeving with Paracord!









I also had time to change all the O-rings in my fittings and my latest addition from Bitspower .... yes this is just a difference of how it looks, was much nicer with Black Stealh look!

 

STOP POSTING UPDATES WHEN I'M SUPPOSED TO BE EDITING VIDEOS!

 

Haha never in my life ! ;D

 

I will now post a quite late update from my last contribution that Arthur sent me a nice little bag, I bought some needed things to make that extra touch for the overall looks
This package contained:
-1x EK GTX470 Backplate, Black
-1x EK Easy Mount, Black
-2x Alpha Cool 90 * Adapter, Black

















An photo that was pretty well, but with the wrong white balance

 

And it's not in focus?

Haha, no seriously - nice new stuff. Apart from the "Look at me!" blue logo, those black fittings look really good.

 

Great stuff man.
I use paracord for sleeving too, but your job of it is much better.