Scratch Build – In Progress 2 of 3 Project :: CNCB (CNC Controller Box) , Finish 18/09/2013

Welcome!!!​

See all project at my blog here :: iD2CNC.wordpress.com​

Project No. :: 2 ,(2 of 3)
Project Name :: iD2CNCB v.1.0
Project Description :: This project i will make CNC Enclosure box and put PC Component into same enclosure (include 15" LCD Monitor) .

Project design ::

​

Specification ::
Dimension :: 540x390x320mm (WxHxD)

Finished 1st project ::









Incoming 3rd project ::

Project No. :: 3 ,(3 of 3)
Project Name :: [GT] Carbide Series
Project Concept :: It not just system , it your Style
Project Description :: This project i will go to an acrylic PC case. I design it to transparent both side and font panel to show what's your style inside or how your style inside.
Project design ::

6 Colors to compatible with your component















All Project by ::
​

Hope you like it.

PS. I'm not good in English , If i make you confuse please feel free to ask me.

 

Start cutting aluminum profile

 

Left Panel cutting.

 

Fantastic work, very keen to see a few 'in action' videos again of the CNC cutting the panels for the case.

Always loved how a lot of CNC designers build a smaller machine which they then use to cut parts to build a bigger machine - and it goes on and on lol.

Will keep an eye on this log too as the CNC machine one was great

 

Thank you, some parts already finished cut i'll take some video of font panel cutting soon.

 

Right panel cutting finished.

 

What type of cutter do you use? RPM? The cuts are so clean!

 

I use
Endmill = 3mm 4 Flute
Spindle speed = 18000 RPM
Deep of cut = 2mm
Cutting speed = 500 mm/minute

 

Wish i could buy a CNC flat packed from you

 

Sorry for not update progress because my storage HDD was dead and it cause my windows problem and it can not boot , i need to install new windows and try to get my data from my storage HDD back.

OK, update my progress now.

Top panel ::












Middle panel ::




Spray paint ::

 

Big update. Start assembly most of all components but still need to finish font left panel , font right panel and back panel too.

Note :: Sorry for some image quality.

 

Awesome!

 

Outstanding work... only one very minor criticism because I'm picky

Where you have the 3 connectors for power (http://id2cnc.files.wordpress.com/2013/09/id2cnc-assemblyenclosure-14.jpg?w=640), given the tooling you have access to I personally would have cut the holes to allow the mounting tabs to be on the inside of the case so externally you don't see the mounting tabs, just the socket for the power to fit flush with the case... like it said tho - I'm picky lol

 

Sorry for reply late just got an accident with my finger.

For 3 connector ,i need to split every tool i use because if it don't need to use something i can turn it off and why i'm not hide mounting tabs because i don't need to working with both side of acrylic and i need to finish it as soon as i can but your advice was good i'll do it in next project.

If i make you confuse please feel free to ask me , i'm not good in English

 

Really loving this project.

 

Sorry for nothing update for a couple week , i got an accident with my finger from knife and it need to surgery.
So i can't do it as normal but i'm try to finish and i'll do it as i can.

PS.sorry for images quality , my hand it a bit shaking when take picture



Font right panel ::



















15" Monitor mounthing ::

 

Finish power wiring and finish assembly.

 

sorry for image quality. (If i can find my camera stand i'll update new picture)

 

Holy ****, that's just amazing.