Case Mod - In Progress 12 Angry Men SPIDER WEB CASE (900 D) FINAL

Although 900 D is a big case , but subdivision too cramped.
U1


One small problem of the case is mounting of the PSU and and work on them.
U2


Only the bottompart of the Rad mounting plate (at back side)is portable. upper part is fixed.can not be romoved.
U4


To be a little more comfortable in the PSU mounting and mounting of PSU connectors ,
I made a mounting plate to install PSU. As I was accustomed from SilverStone TJ 07. Cosmos II
U7


U13- U14




I cut the mounting location of PSU.
U6


Made a mounting plate from 2mm thick alu.
U8


So that, I can mount PSU without tilting and wriggling…
U15


U9


And ı cann take out the PSU without disassembling back rad.
PSU with mounting plate
U10


Pushing the PSU in the case ,backplate with PSU , mounted to the case with four self-tapping screws.
U11


I'm pulling out the PSU and can mount easily PSU connectors.

With adding a frame from 10x15 mm box profile to the backplate , can I mount , an additional 360mm rad to the bottom part of the case ,if it is necessary.

Mounting plate sent to powder coating.

 

This is brilliant, very well done...

 

Thank you itrush07

 

I am also curious as you are for the result. I want to see midplate with color.
I could not wait .

I photographed , before filling colored liquid , with clear liquid and RGB led light.

1 red led


2 green led


3 blue led


4 yellow led


5 white led


6 light blue led


7 orange led



And then with selected fluid MAYHEM X1 Blood red .
.8mayhemX1



a short break
2 Weeks late summer holiday at Fethiye /TURKEY , to watercool my self

 

Holiday is over, continue to work
Worklog of this week.( It's hard work after the holiday…)

Step by step final assembly.
Empty case
R1


First montage of the pipe from pomp to 480 rad.
R2


From MB block to monsta 480
R3


Montage of EVGA 980 Classified Hydrocopper
İn and out pipes of Evga 980
R4


Montage of reservoir without montage bracket like a tower.
R5


Montage of pomp on 3 feet, without montage bracket.
R6


R7


R8


R8a


And at last self made SPIDER WEB GRIL
With 5K Potansiometer as dimmer.
R9


R10


R11


Spider web grill backlighted with led strip and with a dimmer.
R12


Case illuminated with led without fluid, to see th effect and to predict the result.
R13


R14

 

Nice.. Great Work ...arg-ist... as wlways.

 

Because I have changed my house , ı could not add final photos.Sorry.
Some final photos

Although I think the pump to work properly upsidedown.



but I changed pumps position not to risk the pump



Thanks for warning TheL4mka Multimodder.






1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17


19

20

21

22

23

24

25



26

 

I actually don't like red, or scary spiders, but that bottom with all the water canals is AWESOME!

Unbelievable cool, super awesome work man!