Back home - and hope to have a crack at this tomorrow for you! Only snag is it'll be blue PLA as I haven't the mobility to change filament at the mo. Is that a problem?
Printed this today. It's come out really well. From http://www.thingiverse.com/thing:289987 scaled 115%
Anyone fancy giving it a go? Not the one in the picture - the three simpler parts that will screw together. Just let me know how much.
I'm going to play 3D printing tomorrow I think. Will try crazy's part first, then might have a crack at something else?
Just fitted my brand new all metal Mk10 hot end. Not sure it makes much difference with the PLA I am currently printing with but should improve longevity when I move up to ABS.
For bed adhesion, with PLA anyway, I print straight onto glass. I also use a liberal amount of cheap super drug branded Ultra hold hair spray. Never had a single issue. First layer temp 70 the rest 60/65 cannot remember as its a setting I haven't changed for months. Filament temp 205 first layer 85% speed then 195 100% for the rest
Hi veryevil, Yes, that one and the two smaller pieces. They screw together to create the complete bracket.
I'm really sorry mate - hardly able to move around the house still, let alone fire up the 3D printer [emoji20]
Did you manage to get this printed? I could have a crack at it now if you havent, I think I'm fully setup and bedded in.
After not getting the chance for a couple of weeks. The kids and I have finally started the assembly of my/our Prusa i3 MK2. Bought it before the reviews were in - I think I made the right choice 45 minutes in and half a bag of bits down, at this rate we'll be lucky to be complete before Christmas.
I don't know if veryevil has had a go at it - didn't want to pester for something that's essentially a favour, regardless of my willingness to pay for it, but we haven't communicated beyond what's been mentioned in this thread.
I will have a go tomorrow night then. I have grey PLA in my machine that im using up or can change it up to white if you preferred?