Scratch Build – Complete ⭐ The Ice Wall

SSD supports with 2 mm thick aluminum sheet. Folding by hand.

 

Plexiglas support, 8 mm thick, for top tank locking, temperature sensors and buttons display.

 

Realization of the upper plate ducts and the expansion of the video cards.

 

Box to cover the cables whit theme of the project. Hand bend plexiglass 4 mm thick with hot gun.

 

Folding by hand wings motherboard tray that will allow the fastening on the sides of the radiators.

 

Loving this, but Don't hammer stuff on the mill! Mill is your friend and buddy. Give the mill an apologetic oil massage.

 

ahahahahah
The milling machine is pretty robust and giving light hammering on the work surface is like caressing it
It is quite easy to bend aluminum sheets up to a thickness of 2 mm

 

Disassembling the radiators in order to make threaded holes on the sides, disconnecting the pumps inside the system because no. 3 D5 pumps will be used and then replacing the fans with the blue LED ones.

 

Assembly of the entire base.

 

Radiator insertion and visual test. Precision is everything!

 

Very good.

 

Thank you very much

 

BrRrRr that coldddd

 

Good work, better final result of the initial project. Unfortunately I can not vote for it in the monthly contest.

 

Thank you so much dotafax!
Yes, during the course of work I wanted to change the back of the project to make it as much as possible on the Ice Wall. With the blue LEDs I get a cold shiver down my spine

 

Nice work witht he plexi structure, it's look great.

I wanna see how this project turns in the end

 

Thank you Gress

 

Very interesting design.

 

Ice wall
OK, I finally get it. I'm so slow. Lovely job. Good call on changing the pumps. When I saw that cover plate off... What were they thinking?

 

#BrRr I feel cold !
This can be the hastag of the mod

You are not slow, I'm who make the pitfalls

My Mods are always particular and their name is always chosen with the main theme.
I turned the radiators upside down and for this reason I disconnected the radiator's own pumps otherwise I would have burned them.
The cover plate is normal plastic and instead of using the bolts they used self-tapping screws for the plastic.

Soon a new sponsor for the ram and the ssd