First off.... A HUGE thank you to the sponsors. ThermalTake, for their generosity with the case, PSU, watercooling gear, and putting this whole...
To steal a phrase from Mike Petereyns... #modmarathon Last day to work, and boy do I have some pictures coming after today. For now......
Wood stain preview.... Love this shot. [img]
In crazy get this done mode, so only a real quick update while I take a short break in the work. Cut the back panel for the window design:...
Ok... I've had an airbrush for a couple months now and haven't REALLY gotten into using it yet, so I figured this was a good project to break it...
Things are coming together! Cable combs were all installed last night, and they did wonders for the cable runs. [img] [img] [img]...
A first pass at removing the excess resin via a nice end-mill on the cnc. The CNC basically helped keep things level and smooth, without tearing...
Quiet night, but the PSU cables are cut, crimped, sleeved, and threaded. They just need their cable combs added and stuffed into the center...
Clear resin was successful. I used blue painters tape on the top side of the lid, this allowed me to pour the resin from the underside and have...
This is the unsanded clump of resin from a test board I was working on. It was primarily to get the mix of resin, hardener, and aluminum powder...
Continuing the wiring. Doing a pre-sleeve run to ensure I get the proper lengths. I don't have a ton of room in the pocket of the support, so...
Began the arduous task of cabling tonight. Here's a quick test fit I did before sleeving on the 8pin ATX plug: [img] Then MDPC sleeving...
Yeah, the quick 1 tube, 2 LED test I did lit up a lot more than I expected it to....
Last night I spent the evening tearing everything apart and reassembling it. I needed to get the wall mount bracket out of the way inside the...
This worklog was all about the woodworking. Using some cedar from a tree that was downed within the 40acre area around the shop, I did some...
Separate names with a comma.
