Aight well i got my new motherboard and processor working finlaly. Now the only problem is that the processor is only running at 1.7ghz when it is supposed to run at around 2.6ghz. The processor is an AMD XP 3000+. The motherboard is a Chaintech SKT600. Any and all help would be great...THANK YOU!!!
Assuming that you have the 333fsb model, the 3000+ runs at 2.16ghz~. It seems like your board is running 133mhz fsb (13*133 = 1.7ghz~) instead of the (correct) 166mhz fsb (13*166 = 2.16ghz~). There should be a setting for the FSB in the bios.
TMM is correct the XP3000 does not run at 2600MHz it should be 13.0 X 166 2160MHz So change the FSB from 133 to 166.
alright thanks....i'm going to try with the bios. But also I think I have to set on the actual board cause there are jumpers to set the FSB. I think right now it is just on default so i'm going to try that out. THANK YOU!!!!!
Some motherboards (such as an ASUS one I've worked with before) require you to set the FSB speed via DIP switches on the motherboard.
My 3200+ XP needed to have it's FSB upped from 100 to 200MHz when I first installed it. No jumpers needed, just a quick BIOS change.
well i went ahead and changed the jumpers cause the case was off anyways....and it's all fixed now!!! WOOHOOO!!!! Thanks everyone!!!