Case Mod - In Progress ProJeCt : ToTecHniKa by AnG3L (09 April - Totechnika's video)

Here I am for a small update. I sleeved and created some cables that I am gonna use with my mod!

Here I used some cables that comes with fans etc. to create some moles extensions.



Removed the molex.





And eventually I left the cables only for better sleeving. Even though that these cables wont be visible I wanted to do something nice.





And here they are finished:





I found some splitters and I decided to use them. So I had to sleeve them too.
I also changed the molex with some easy grab ones and also different color not like they will be visible but they are easier to use.













My order arrived from MDPC-X and Mr.Nils signature as always unique !!



Some red sleeving, rivets and M3 screws....



So here you are going to see me creating 4 PCI-E cables. I had to do this cause I couldnt find proper extensions. I used 20 meters wire, pins, a lot of sleeving and a looooooooooot of patience!!!

Here are the original cables which I will disassemble so to see where the cables go from the one plug to the other and also cause I am going to use the PCI-E plugs.



Passing the 8 wires through the sleeving.



Striping the wires



The cables ready for some sleeving



Red and black sleeving and heatshrink ready



So far so good!



I added heatshrink to the inner part of the cable for extra durability





Pins arrived eventually from USA (it took almost a month!)



The worst part it was the "pins" one!! Even though I had a crimping tool a lot of cables had
to be double making that impossible to use the tool or push them into the PCI-E plugs. Eventually after 4 and a half hours I managed to finish the cables. I eve applied the uneven technique here by placing the red - black sleeving in different patterns and also the heatshrink so they are 2 - 2 cables the same.















See you soon guys. Please coment and feel free to post your ideas and impressions!

 

Nice sleeving work!

 

Thanks brother perplekks45!! Sorry that I dont know your name!

 

Damn... I can only imagine on how long it took you to do those ))) I'm sure patience was one of the main factors))) (In the end it'll pay off(I hope ))


OMFG the totems!!! That's amazing!!! So cool)))

 

Top notch work on the sleeving.

 

Thank you my friend!! Patience its a weapon that leads to victory but sometimes it kicks hard
on the shoulder!

Thanks brother!

 

excellent sleeving skillz. very good work!!

 

It's Frederic.

 

Nice work on the cables mate, they look very nice .

 

Thanks my islander friend!!! Your name??? I decided to learn your names!!

Nice mate !!! Mine is Alex!

Thank you _______ (you put your name here!) my friend!!!! Much appreciated!

 

My name is Jason .

 

Great sleeving! The case reminds me this TV show:

 

Nice to meet you Jason!! I am Alex!

Thanks man!! LoL about the tv show!! I never thought of that! Good point!!

 

No its patrick

No its Patrick!!



Should i really be commenting on the cartoon? please don't include details from it on your case!


cheers from David of mauritius

 

So I suppose everyone its Patrick?? LoL Hello David my islander friend! Viva Mauritius!!!
And dont worry I am not going to do any crazy cartoon things with my case!!! Should I? LoooooooL

 

this is the one in everyone's avatars.

 

LoL yes I didnt notice that!!! LoooooL

 

LoL my friend Patrick. Oh.... I mean Frederick!! LoL