[ Hello everyone! It has been a long time since my last worklog. So what better way to start one with EK at Bit-Tech!! Ek contacted me to join this competition they are having with the Vulture case and of course I was all in! I have my work cut out for me after seeing some of the builds that are progressing along nicely. There is some great talent involved in this comp and I am anxious to get going on my build now that I have some breathing room. ( Just finished a bunch of clients builds that had short deadlines.) For my build I will do what I do best a super clean build. Being that most have a very unique look already I'll keep mine simple. I will be incorporating something new into this build that I haven't tried before, but more about that later. Lets check out the parts and case. I would like to thank the following sponsors and especially EK!! As to spec I will be running the following - Intel i7 4790k Asus Maximus VI Impact Nvidia Geforce GTX980 ( May change) Cosair Dominator Platinum 2133mhz 16gb kit Corsair Neutron XT 480gb x 2 in raid 0 Corsair AX760i psu Silverstone 8x DVD slotload Originally I had 1 x 240gb but decided to go with 2 x 480gb so I can use for lan parties. Ok so now some awesome goodness from EK and the DVD drive lol - Stay tuned for another update shortly. The case is already getting some color! As to spec I will be running the following - Intel i7 4790k Asus Maximus VI Impact Nvidia Geforce GTX980 ( May change) Cosair Dominator Platinum 2133mhz 16gb kit Corsair Neutron XT 480gb x 2 in raid 0 Corsair AX760i psu Silverstone 8x DVD slotload Originally I had 1 x 240gb but decided to go with 2 x 480gb so I can use for lan parties. Ok so now some awesome goodness from EK and the DVD drive lol - Stay tuned for another update shortly. The case is already getting some color!
Wow you guys are a hard group to get a comment out of. Alrighty! How about an update? Long overdue. So I got the case back from powder coating and I must say it looks wonderful! Started on the block install as well. Ram block will be changed once I get the CSQ one buffed out. I'm working on wcing layout now so hopefully another update before end of weekend. Thanks for looking.
Busy busy busy!! Leave for Taiwan today and when I get back I'll be moving to my new shop. Ok so on with the build. This will be my Final set of pics and there are a lot, so excuse the picture spam. LOL. I may take some better final pics at a later date maybe after I'm back. You'll notice the 90's on all bends in the next couple pics. This was a new approach for me since I've always bent my tubes. But it didn't look right in some areas so I reverted back to some bends. I'm not much for words tonite. I think the pics speak for themselves. Here's where it gets fun. Wait for it............ LOL Finishing touches I added the Limited edition badge back on to the case. Well that wraps it up for now. Thank you for checking out my worklog. I'm gonna go take this build for a spin!! Until next time..................
