update 23 - Sleeving and pass-trough (list of all updates) Hey guys! I'm back with some more slleving today! But first, come custom perspex parts to be used in the process Drawning reference points and lines a little cutting measuring sleeved cables diameter: 3.00 mm drilled holes and sanded the edge: 320-600-800 parts done for the 2x6pin connectors removing pins pass-trough first impresion mounted now working on the 8-pin EPS parts 8-pin EPS result and finally 24-pin connector done for today! see you soon for more updates!!!
update 24 - Light Switches (list of all updates) Hi guys, its'been a loooooooooooooooooooooooong time since my last update, I had a really hard time studying and some quite tough personal stuff going on too... BUT now I'm back (yay!) Today I spent some time building the little switches panel for the rear of the case, it will also work as a pass-trough for cables to the mobo the revoltek cold cathode's pcb naked panel installed after soldering the neon power cables to the switch enough for today, more updates very soon (I promise)