Scratch Build – In Progress " Dragon Desk" ( build in progress )

Today I begin to make the rear holes of the radiators, where will waste 2 ::



Small and simple idea, to smooth the circles ::



And finally mount the radiator ::



Now the two radiators are united, skipping the power supply, with rigid pipe, so I am created a template of the curvature ::



Now I connect them with its fittings ::







.............

 

slick bend around the PSU

 

Hi guys

Today it mounts the grids 360mm Phobya and since the 3 fans are distant 20mm from each other, I have to make holes ::





Now you have 2 buttons 25mm::












................

 

In the meantime a little sleeving...



Now after taking exact measurements , start to make holes for the bulkhead ::







Now step to the vertical panel of the mobo , even here the holes of the bulkhead , and the screen of the liquid temperature , and the window for Strix ::






.....................

 

beautiful buttons ......., I have to take them too but I am undecided on color and color of the LED must have.....

I follow you



Good WORK......!!!!!

 

Hello guys ... Today we start with a layout , to mesh power supply::



Once covered the area with the paper, proceed to give a nice pass from vinavil::



So look 24H::*



Now that thelayout, it is hardened for good, proceed with the 1st pass, with a little bit::*



Then go climbing with the measures of the tips::*



Removed the burrs , it introduces itself::



....................

 

and this is the air intake in the shape of flower..............

 

Here we are, now a chore easy easy:**





Aluminum thread M 4X0,7



Allen Steel::*



And finally fixed it all:**







.................

 

Meanwhile came the sister, because she was lonely .....






................

 

Now it's the most fun, position the 2 lower grilles of phobya, under the desk , in the air inlet to the radiators ...





Now I take the imprint of the hexagons grid.....



And then slowly , I take all their centers .... ready for drilling .....





.................

 

wow. have fun filing that my man

 

There will be fun ...

 

Here we are guys, after a little break, because night work.

I begin the adventure of 244 holes, with a tip from 6mm to start..



Some chips ...



And now a nice clean.



Now we start to make holes with a cup 16mm, with the new drill of Bosch, as my old Valex has abandoned me .




...............

 

Now we begin the work more complicated, I start with a first pass with a cup 16



Some cutting oil , does not hurt



Chips - chips , chips and more



And yet chips



And after 3 hours



A nice clean, and tomorrow will continue , with smaller holes

 

This looks incredible. You have my attention.

 

Thank ajangusjames.

 

Very nice, jealous of all the WC parts!

 

Hi guys ....
n this step , the aluminum hole , to fix any HDD 3 , and on the shelf 3 SSD





I put the rubber to the vibrations.



Now it's up to ssd.





...........

 

Fixing the grid Phobya.



Now the holes Laser Guide, I make a thread, and insert the allen steel.



Some wing nuts.



Finally fixed the hatches with butterflies, so 'to be comfortable, and no tools for disassembly.





PS:
A little helper for precise holes.

 

Today day soft......then mounting radiators and fans....








...........