Case Mod - In Progress super water cooling dual run system

here is a comp just finished for a customer came out so nice had to post a few pics

will do a run down on the build once i get a chance

specs for comp are

quad core qx6700 2.6 clocked to 3.625 running stable
dual 8800 ultra superclocked
dual 150 gig raptors raided and watercooled
500 gig sata for storage
killer nic card for gaming
2 240 thermochill radiators one for the CPU the other for Vid and hardrives
1 120 thermochill rad to help with vid and harddrives
2 thermaltake pumps one for cpu one for vid and harddrives
zalman fan controler
Swiftech GTX CPU waterblock
Swiftech Stealth waterblocks for vid cards
and extras more to come

3d Mark score 18501
Your system compared to all 1880968 system configurations. There are 995 systems with a higher score and 1879973 systems with a lower score than your system




will add more pics as well as some build pics later

just want to see what you guys think

 

amazing, except kinda troublesome that you wen't with thermaltake pumps... those leak and fail all the time and i advice you get some laing d5's or something like that.

What gpu speeds are you running?

 

Wow nice specs but I think the Killer NIC is a scam

Is that a Thermaltake Mozart??? What PSU are you using to power it???

 

At the moment I don't feel the KillerNIC can be used to its full potential. Once games start using a lot of bandwidth, then that's when it'll start to come in handy to have a dedicated NPU.

 

you forgot to mount a fan in the bottom left corner
hehehehehe
at the cleanliness of it all. with all those wires and tubes you sure managed to make it quite clean. although I do wonder what this guy is gonna use it for...

 

Not dissing on you mate, looks really good. But what's the use off all those fans if you're having watercooling? In my humble opinion you could have gone with 2 fans on each rad, and possibly 2 fans in front and 1 in the back. Might have saved you half the noise I guess...

 

i love that "resistance is futile" sticker lol nice add
any pics of that WCed HDDs? internal shots PLEASEEE

 

Not everyone uses Watercooling for silence. In fact most use it for performance with overclocking.

 

I'm the client with this rig. Rob did a great job helping me with this build. As to some of the questions out there. its a mozart tx case( I had the armour lcs case before but not enough air flow and only a single loop system) power supply is a 1000w silverstone the Killer nic does make for smother game play as far a lag is concerned the ping control is nice if playing on servers that require me to increase mine for fair game play. so far very happy with how its turned out.

 

Must be a hell of a f***ker to lift around the different LANs
Awesome hardware, sounds prette expensive, huh? Nevertheless, nice setup!

I'm sticking with the statement that there's too many fans and I recommend laing pumps too (got one myself, works like a charm, great flow minimal noise) - but if it's solely for overclocking, I'd go for phase change, ought to be room enough for one?

More pics if possible?

/Frido

 

That's nuts! Reaper memory and not Flex! Watercool them too!

Looks pretty crazy and must be a bitch to move.

 

:gasp: silenx fans :gasp:

 

the crazy client again. Just waiting on the new 45nm chips before going to 4g of water cooled ram. Currently my heat load is greater than phase/change will handle from what i've been told. I'm running at close to 300w heat output on the cpu and the best of the phase change units we've found are around the 200w mark.

 

hmm, 300Wats from cpu?? hmmm, lets say its 3.6Ghz, so for 300W heatload you should run it at ~1.75V I hope not...
its actualy 180-220W IMHO
Anyway, nice rig you have

 

running cpu voltage at 1.65v to race for benchmark but idle temp rises to aprox 53c. can pull down to 1.575 v and idle at 42c but wont run mark 06 but runs everything else. heat load is in excess of 250w at 1.65v so the phasechange would be overworking. Any sugestions welcome

 

i know poeple that run quad core cpus overclocked like yours. you just have to get one custom made. just pc me if youd like me to put you in contact with some one

 

he is rich boy wooot hope you enjoying your hardware good luck and take care of them

 

that's great!!!!