Today I made final job to the front pannel - I painted symbols for description of switches. It wasn't easy... I made them using templates like this
Thank you, I'm working hard now and I plan to finish this week with the case. Then I'll start with the keyboard and mouse.
How did you made this? The current measuring cirquit? Can you show a schematics or something? Silly me, you are measuring directly 220V currrent, aren't you?
Wow, this mod is awesome, great attention to detail with the ageing.. Everything was well-executed, especially for a first time mod. Kudos to you!
Yes, I'm measuring AC 230V current. First I was going to measure DC currents for all lines but it was too complicated and a dangerous for the PSU - I could have spoiled it. The apmermeter is connected directly between mains and transformator. Its a serial connection of course. I think I have done a photo of the connection.... I'll look for it.
Thanks. That's the easiest way, of course. And reliable. Only safety... I hope the ampermeter connections are correctly isolated About the whole case: looks great! (Btw, RTCW is one of my favours.) Thanks for explaining, how you made the rust effect. Looks really real! (Right now I'm trying to made rust effect on my case. Only problem is, that I don't have those sprays and I've got to work with waterbased acrylcolors. Result looks a little different.)
Hi, I didn't like the cabling so I made new 3,3V monitoring And I rearanged the front pannel - I didn't like the former colours
OK I'm speechless... If this is your first mod than BRAVO!! Hope to see it's completion....BTW ET is my ABSOLUTE FAVOURITE GAME!!! Hope to play with you sometime...BTW make sure to let the guys at Splash Damage know about your case...you might get an advanced copy of the new ET.
Thank u theurgy! Actually I made several mistakes and attempts to get what I want. I colud post in "disaster mods log" as well As always, the effect is not like I wanted to achieve But I think I'm very close to my first idea and the mod fits the Wolfenstein theme.
I made changes to the fans couse the china "superred" logos didn't fit the wolfenstein theme and golden grills I painted them black I printed RTCW logos on the regular laser printer and painted 4 times with the varnish cut out 2 circles and fixed with glue on the fans
well, its time to test if the electronics works first the voltages 3,3V 5V 12V now, I test fan voltages the case fan voltage zero couse the fan is off if the fan in on look at the left potentiometer it's high and now it goes low the PSU fan - it's controlled automatically by the PSU and the processor fan the right potentiometer low voltage and higher voltage and the current The total current is unfortunatelly zero because the test system is very old - it's a penthium III 600 MHz and the total power consumption is below 100W. To make the amperometer's indicator go it requires minimum about 250W - then the current is about 1A