Modding my Test PSU mod

heres something i decided to build to help me out in upcoming projects..this way i can test out stuff without always having to scavenge in the pc casing for unused molexes

ripping apart a old antec 350w..after a crappy paintjob some drilling n wiring we hv this :

hope u guys like it!



The left sockets provide 12v n the right gives 5v.

 

These are wired with a resistor so i can test LEDs

 

oh good work.
i just have a normaly psu attached to my desk. just cut of a few of the plugs for power. i should probly make it nice like that but im way to lazy

 

thanks : ) i had too much time

 

Nice! gave me some ideas for my test PSU

 

Very cool
I often wondered about creating one of those. But haven't had the time. Love the yellow paint.

 

I've also made one of these,550W shoved it in a metal enclosure i had, very useful for testing everything.
Mine is rigged in to start with the on/off, the two sets of red and black are for 12V one with small jaw like ends, the other with multimeter tips.The rest are regular 4 pin molex and fan connectors.I even installed a temp sensor to know how cold it is in my "friggin" (*fridgin* ) basement lolll
I strongly encourage anyone who's even mildly into modding to make one, you'll wonder how you did without it

 

thanks all...cool box Kobalt..was thinking a digital voltmeter would be a even better addition to it.

 

I just have an old AT powersupply running with all my server gear, it runs a few fans but when I need 12/5V it's there.

 

I just use my modded 120 watt Power supply for anything molex, and a snazzy 300w 0-60V adjustable power supply for anything else. My current case mod has some front mounted molex connectors so you can test out fans and curcuits on the fly.

 

pics back up