I am sooooo jealous of your metal working shop, especially the mill. Are you using an online translation service to write your posts?
Update [2006-07-25] Older, put on some weight and maybe a bit unfocused. But here’s a four days period of work. Back again. Unpacking The bad quality of the steel has become a bit rusty after some worm weeks up here in Sweden. Making another front bezel for the second fan bus which should be in place shortly. Preparation of the frontpanel Some grill which are supposed to cover the hols for the fans. Had some problems trying to bend them. And the frontpanel which are supposed to have three air intakes has been redone from planning. The previous thought: __________ __________ __________ Made some bad tightening of the panel and the mill got some to the left and nearly messed up the whole front. But it's a minor ****'up from me. Bye
Day 2 :: Are u talking to me? [2006-07-26] Just whana present a new friend, a Manfrotto stabilizer for the camera. Better fancontacts? Become quite okey, but the cables are awsome.. Away with oldies New fronpanel for Power, Reset, HDD light och Power light. DThis time with blue plexi in the background.. Hopefully the complete work will hold the same standard.
Day 2 :: Are u talking to me? [2006-07-26] Just whana present a new friend, a Manfrotto stabilizer for the camera. Better fancontacts? Become quite okey, but the cables are awsome.. Away with oldies New fronpanel for Power, Reset, HDD light och Power light. DThis time with blue plexi in the background.. Hopefully the complete work will hold the same standard.
continued... On the front we goo. Made a form so there whont be so hard to make the right form of the grill in the front. This day worked out pritty fine, got one point from the planing removed which feels great. Whats this?
Day 3 :: Chemical metal [2006-07-27] I LOVE THIS MACHINE! Pads which should be between the wheel and the plexi. Long time no seen Pretty fun to hit the grill into different shapes.. Hopefully will look more attractive in the future...
Day 4 :: Endphase one? [2006-07-28] The previous shroud for the GFX card would be to complicate to workout, so a new maybe easier one is beeing made. Hit hard Hopefully it will look nice with some black color later.. That is alles.
Sweet, I want a CNC too! Good job on the mountingplate too the switches Edit: You posted the same update in two posts
Why did you mutilate the nice even fins on the GPU heatisnk? Looks really sweet though. I love the front panel and your manual mill
Wow, i was reading this through, and wondering what in the world you were going to need all that fan-controller-age for, but this case is going to packed with fans. 3-4 fans for the graphics card alone... incredible Keep up the fantastic work
Thanks, a bit noisy maybe, but hopfully with the fancontrollers it will be controlled and well circulated. The gpu heatsink was to high and a bit lowerd so it will fit. One or maybe two PCI cards will be underneath. Thanks!
OCZ - Seasonic 600W :: ONE [2006-08-31] OCZ Powerstream 520W Seasonic 600W Now added the two OCZ cables to the Seasonic. Edit:
Intel Core E6600 + P5W [2006-09-03] Some smal updates, wish to bring some more, but not untill thursday for that