1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Miranda™

Discussion in 'Project Logs' started by Razor_cut, 6 Nov 2005.

  1. customh

    customh conflagration.

    Joined:
    22 Oct 2005
    Posts:
    2,590
    Likes Received:
    1
    B-E-A-U-T-I-F-U-L
     
  2. Razor_cut

    Razor_cut What's a Dremel?

    Joined:
    12 Mar 2004
    Posts:
    205
    Likes Received:
    0
    Sandpaper: 800, 1200, 2000. (start with the 800. But even better
    is to sweep the whole area with 200grid or so at first. the the
    following rout. But be shure to move back and forth, back and forth etc.)


    Yes I haven't polished the acrylic, but will do later.
    Thanks for the remider thou. :thumb:

    Thanks for the positive feedback!

    ;)
     
  3. Denied

    Denied What's a Dremel?

    Joined:
    28 Oct 2005
    Posts:
    126
    Likes Received:
    0
    That looks really really good... are you going to treat the finished surface though? Autosol is great for making things shine but that will go tarnished and rusty if you don't at least put some wax on it (similar to when you polish your car)
     
  4. Razor_cut

    Razor_cut What's a Dremel?

    Joined:
    12 Mar 2004
    Posts:
    205
    Likes Received:
    0
    Will spray it with Protection clear lacquer, clear
    spray witch will hold the clear surface I hope..
     
  5. Razor_cut

    Razor_cut What's a Dremel?

    Joined:
    12 Mar 2004
    Posts:
    205
    Likes Received:
    0
    • I grinded the sides of the acrylic plates.
      But theres nothing called perfect here..


      [​IMG]

      [​IMG]
      Plain and shiny.

      [​IMG]
      How it looked erlier. Some difference..

    :thumb:
     
  6. Fozzy

    Fozzy What's a Dremel?

    Joined:
    25 Jan 2005
    Posts:
    1,413
    Likes Received:
    2
    I think you should put the acryllic plates on the outside. Would look better IMO
     
  7. ReFredzRate

    ReFredzRate Relix Headshot!!

    Joined:
    2 Sep 2002
    Posts:
    2,207
    Likes Received:
    0
    Imo, the acrylic plates look great where they are now, only, they should be lit up.
     
  8. Denied

    Denied What's a Dremel?

    Joined:
    28 Oct 2005
    Posts:
    126
    Likes Received:
    0
    I have to agree with fredz too, this way it's nice and understated.

    Looking really good, those edges came up a treat!
     
  9. Guest-2867

    Guest-2867 Guest

    yeah just mount a few LEDs in the bottom of the acrylic, it'll look amazing if you hide the wiring well
     
  10. Razor_cut

    Razor_cut What's a Dremel?

    Joined:
    12 Mar 2004
    Posts:
    205
    Likes Received:
    0
    You just laid the planing open for the webb. :thumb:

    But we will see when theres time to continue.
    But there will be four LEDs on the plate with
    9 holes and possibly two on the other side...

    Thanks!


    • The surface on the metall has been sprayed with "anti rust" or something. It looks more like glas now :)

      [​IMG]

      [​IMG]

      [​IMG]

      [​IMG]

      [​IMG]

      [​IMG]
      Not so well pollished but this side will not be seen in the case.
     
    Last edited: 12 Sep 2006
  11. Klekkus

    Klekkus What's a Dremel?

    Joined:
    5 Nov 2005
    Posts:
    765
    Likes Received:
    0
    Nice, after some more sanding and polishing it looks much better!
     
  12. foundsoul

    foundsoul What's a Dremel?

    Joined:
    24 Aug 2004
    Posts:
    371
    Likes Received:
    1
    May i ask is this really needed?
    [​IMG]
     
  13. hydro_electric_655

    hydro_electric_655 Dremelly Dude

    Joined:
    13 Jul 2006
    Posts:
    1,492
    Likes Received:
    0
    I don't particularily like the HSF unit but the idea is nice. The execution...could use some work.
     
  14. Razor_cut

    Razor_cut What's a Dremel?

    Joined:
    12 Mar 2004
    Posts:
    205
    Likes Received:
    0
    It will be used untill the GPU block arives...

    Since the work was made mostly on the fact of outlook, estetics etc. I didn't think of air pressure.

    [​IMG]
    The blue dots are nipples from the radiator (PA120.2).


    Soon another update.
     
  15. Razor_cut

    Razor_cut What's a Dremel?

    Joined:
    12 Mar 2004
    Posts:
    205
    Likes Received:
    0

    eVGA 680i
    :: eVGA 8800GTS :: PC-V1100B :: Mushkin XP2-5300
    pix


    The orginal modification, Miranda, is short out of work. I mean time this is the comp I setled for.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
    Love this nVIDIA cooler, togehter with the RAM it's nice.


    [​IMG]

    [​IMG]

    [​IMG]
    The motherboard is compleatly in my taste, simple and clean.


    [​IMG]

    [​IMG]

    :thumb:
     
    Last edited: 28 Nov 2006
  16. customh

    customh conflagration.

    Joined:
    22 Oct 2005
    Posts:
    2,590
    Likes Received:
    1
    Last edited: 28 Nov 2006
  17. Jipa

    Jipa Avoiding the "I guess.." since 2004

    Joined:
    5 Feb 2004
    Posts:
    6,367
    Likes Received:
    127
    Damn sexy hardware :)
     
  18. JAxen

    JAxen What's a Dremel?

    Joined:
    18 Nov 2005
    Posts:
    243
    Likes Received:
    0
    Nice to see that your still alive n' kickin =D
    And yes, damn sessy hardware..
     
  19. RonaldoR9

    RonaldoR9 What's a Dremel?

    Joined:
    17 Dec 2006
    Posts:
    96
    Likes Received:
    0
    lol is this thread still alivee

    btw i love that board evga is sickk plus them mushkin ram amazing

    ccan u post pics overall of the board not zoomed in i wanan buy that ram and board buy i wanna see if that green pcb ram is taking away from the 'black' look of the board
     
  20. Thorn

    Thorn Gaijin Studios

    Joined:
    19 Feb 2004
    Posts:
    177
    Likes Received:
    12
    Project dead ? hmm or still alive ?
     

Share This Page