1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Modding Clear PC INSIDE.....

Discussion in 'Modding' started by Koolvin, 2 Nov 2001.

  1. Bursar

    Bursar What's a Dremel?

    Joined:
    6 May 2001
    Posts:
    757
    Likes Received:
    4
    Yes it is, but they're a bit more pricey than normal ones. Around £1.50 - £2.00 each.
     
  2. Jacko

    Jacko What's a Dremel?

    Joined:
    9 Oct 2001
    Posts:
    13
    Likes Received:
    0
    where from dude?
     
  3. Bursar

    Bursar What's a Dremel?

    Joined:
    6 May 2001
    Posts:
    757
    Likes Received:
    4
    Right, here's the info...

    Rapid Electronics - Tel 01206 751166

    Nichia white LED £2.10 + VAT each
    30mA If max
    100mA Ifp max
    4.0v Vf max
    5.0v Vr max
    1100mcd @ 30mA
    50° 1/2 view angle

    Kingbright white LED £0.70 + VAT each
    30mA If max
    100mA Ifp max
    4.0v Vf max
    5.0v Vr max
    300mcd @ 20mA
    16° 1/2 view angle
     
  4. Jacko

    Jacko What's a Dremel?

    Joined:
    9 Oct 2001
    Posts:
    13
    Likes Received:
    0
    cheers :D
     
  5. Kevo

    Kevo 426F6C6C6F636B7300

    Joined:
    9 Sep 2001
    Posts:
    3,669
    Likes Received:
    0
    Nichia white LEDs rock!
     
  6. Bursar

    Bursar What's a Dremel?

    Joined:
    6 May 2001
    Posts:
    757
    Likes Received:
    4
    I bought one of each of the above LEDs but I haven't gotten around to installing them behind my case badge yet. It's currently got a 1000mcd blue LED behind it, but the white should look much better.

    Be prepared for the A4 sheet of safety precautions that come with white LEDs though :)
     
  7. Ataraxia

    Ataraxia <b>OOH BABY!!!</b>

    Joined:
    12 Mar 2001
    Posts:
    497
    Likes Received:
    5
    what, with warnings like "don't burn it out 'cos it's really expensive to replace" etc etc?

    or is it just in 27 different languages?

    or is there something I should know?
     
  8. Jacko

    Jacko What's a Dremel?

    Joined:
    9 Oct 2001
    Posts:
    13
    Likes Received:
    0
    i blew some LED's once. only problem with haluminium cases :p :rolleyes: wasnt a pretty smell to it either. bout 12 LED's all went at same time :mad: blue ones too. had to stick original LED's back in but i got some bloo ones on the way should be here tomorrow morning.
     
  9. Bursar

    Bursar What's a Dremel?

    Joined:
    6 May 2001
    Posts:
    757
    Likes Received:
    4
    Let's see:
    So, a couple of things there to be aware of :)
     
  10. macroman

    macroman The One

    Joined:
    3 Sep 2001
    Posts:
    1,859
    Likes Received:
    9
    Yeah but can you drill them? :rolleyes:
     
  11. Jacko

    Jacko What's a Dremel?

    Joined:
    9 Oct 2001
    Posts:
    13
    Likes Received:
    0
    damn i wont leave my LED's next to my pint of Hydrogen Sulphide then :( :p
     
  12. MoD

    MoD What's a Dremel?

    Joined:
    13 Oct 2001
    Posts:
    57
    Likes Received:
    0
    just a question:

    do you use an "electrostatic wrist-wrap" when soldering leds :cool:

    MoD
     
  13. Koolvin

    Koolvin The Modfather

    Joined:
    12 Mar 2001
    Posts:
    1,656
    Likes Received:
    1
    Your supposed to on certain LED's - just for the record - I always do ;) :rofl: NOT
     

Share This Page