EDIT: I decided to name my project Simplicity, because i think its a simple\pratical\(and if i may say so)beautiful mod I hope you guys enjoyed watching it step by step, its almost ending. I hope tuesday to have it up and running. Thx to all that replied and watched my case getting shape and form. TY ALL Hey I wanted to buy a new case for my new parts, since money was lacking i decided, Well lets just try to mod her Parts: MSI 975X PowerUp Ed. MSI Nvidia 8800GTS Cooler Master HYPER Intel LGA775 CPU INTEL Core2Duo E6600 Samsung 1Gb DDR2 800 x2 Creative X-Fi Fatal1ty WD Raptor 10k 74gb WD 250GB 16Mb Cache SATA2 x2 (Raid0) 5x Cooler Master WhiteLED Fan 120mm Seasonic M-12 600W I would like you guys to criticize my work and tell me what you think so far, its my first mod ever. I took some ideas from ALOT of ppl in order to set my own. So here it goes: The parts (missing PSU) Dismounted case Marked to cut Cutting process Radgrilz 3x120mm will be on top Painting process (Black paint WAS CRAP but its done now i wont be fooled again) Primary on the aluminum sides Painting process II (Bourdeaux this is GOOD PAINT ) Status: Im still painting the "red" parts, ill give it some 2\3 more coats of paint. Then im starting the mesh interior part to hide the PSU and the holes opening only small holes for the PSU cables to get through; Mounting the Radgrilz and doing 2 plexi led holders on the bottom and on top. Ill update has soon has possible (paint takes a while to dry)
Me too lol Just gave another coat just now, tomorow ill prolly sand it good and give it the last coat.
Looking nice so far could you please explain more about how you painted the black i think it looks quite good
Heres a Small update: 4\3 fully painted with the HDD's DVD-R \ DVD-ROM and Floppy My new cables ORANGE (Contrast of them with the black paint) Status: just checked paint, case is fully painted ill let paint rest tomorow and ill remove the protections and make an update tomorow also. Also start mesh "hiding place" for the PSU. To sirkillalot617 the point isnt in the how i did it, its in the paint itself, i bought the paint thinking it was good but when i painted it left some "waterly" traces only after 3 coats they disapeared a little. Then i found out the paint could be diluted in water and i learn NEVER AGAIN TO BUY WATER DILUTED PAINT :| Well 1st timer error, wont happen again for sure
Looks sweet and prmising! like the cables not so sure on the red but cant wait to see a final product. ncie job!
Heres another update: The Case Fully Painted For a 1st timer i think its fairly good, black paint could be WAY better. Oh well next time ill buy good paint
If you live in the UK Halfords do good paint i used it for mine and i got good detail out of the cans. The mods looking nice btw, did you find the case hard to take apart as i have one of these and was looking at how to do it and looked confusing and gave up.
Im too lazy, i didnt take it apart Thou u can paint it very nicely without taking it apart. Theres lots of logs in here and in other forums that u can see a stacker being taen apart, imo isnt very hard but its ALOT of work, and im just too lazy
Ok, here's another update on my workprogress: The PSU cover in card: Mesh waiting to be bend to make same for has the card one: Mesh to be cut to fit the holes in the case: Mesh cut: Grill for the top: Painted screws for the back fans: Case Holders: Sanded side panels (rdy for another coat): Ready to cut plexi: Plexi roughly cut: Plexi + Painted top of case: Photo without flash so that you see that its a dark red and not orange Status: i intended to start bending the mesh to make the "PSU hideout", finish the painting of the dark red, open holes in the case\plexi to put some white 5mm leds, AND HOPEFULLY start puting all together with the parts next week. Ty all for your opinions
Heres the Update: PSU "hideout" Grilz!!! Grillzzzz!!! II Side Panel fully painted Side Panel fully painted II DVD \ HDD holder