It's done list of mods: LEDS replaced front LEDS with 5mm 7000mcd red each side has a red and orange 3mmm led highlighting a component the rear fan is illuminated with a red and orange led which wouldn't capture on the crap camera I have in anyway so I haven't shown it. cutting Rear honey comb mesh removed psu fan frill removed other red thumb screws new front panel picture 120mm nexus fan 120mm grill this pic shows the rear of the shuttle, I had to take it with flash as the camera wouldn't focus without it so the awsome glowing light effect isn't showing: big thanks to all the people that helped me with this mod: peter my dad the people on bit-tech who advised on LEDs
nice couple of questions: -I got a 120mm on the back of my SNG, out of intrest do u still have a fan inside on the ICE cooler? -That 120mm adapter is much shorter than mine, where's it from? -Hows that nexus for sound? looking for a silent 120mm that works well on the shuttle auto temprature thing... cheers.
-No I got rid of that -www.ebuyer.co.uk not sure if they carry them anymore -nexus is inaudiable in a silent room (eg 3ft thick stone walls in small quite town at 2am) when running under smart fan at any distance greater than 10cm. At full speed it's a dull murmer that's quickly blocked out by the brain. Airflow is good enough for an sn45g.
nice mod you got there personly that fan not being flush would bug me, but other than that good work how about a dark shot so we can see the led's ????
In the flesh? In the steel-and-silicon Or did you do a biomech mod on it? Looks nice btw You don't see orange being used often. Mostly primary colors in casemods. Red, green, blue, some black or white. It does look very nice... people should use different colors a bit more often imho
very nice mods man, i like them a lot. very original. i recently did some mods to my Shuttle SB61G2v4. i put a 92mm fan on the back but my fan is really loud because of the honeycomb grill, what did you use to cut that out? i could really use your help, thanx man.
draper clone of a dremal with normal cutting discs, it took about three discs as I'm not very good with it and the discs kept shattering. Good luck with your modding and thanks for the kind comments
Holy thread resurection batman! thought I would update the shuttle is to my freinds house in london and will be funrnished with a nice fat 24mb/s pipe. Software has changed lots still running ubuntu but now all done command line through ssh and everything made uber secure. Now also running with no graphics card to lower power consumption and the LED's have been removed for the same reason (although will still put them in for lans). The sn45g has to be the best shuttle ever made
are they still using 40mm fans on the PSU in those things? if so and you want to really help out that psu let me know i got a few 40mm to 60mm offset fan adapters that work nicely on the shuttles.