Case Mod - In Progress Project Harbinger: Loop is Done and Installed

I've seen that done and due to the limited space I thought I wouldn't be able to do it but I found these nice fans from Scythe http://www.frozencpu.com/products/9...2000_RPM_SY1212SL12H.html?tl=g36c15s972#blank their only 12mm thick and have 45 CFM each the rad will pull air from the outside and the exhausted hot air will by taken out by 2 80mm fans above the PCI slots. Rad should be in by tomorrow so updates then.

 

Crazy Idea

I was looking at some of the mods and I saw EEL's Checkmate mod and noticed the PSU in the front that got me thinking if the same idea would work for Harbinger and yes it does !!!!!!!!!!!!!
So depending on how the stealth rad fits I may be able to fit 2 240mm rads in the case one of those being in the space where the PSU normally sits.


Sorry for the crappy pics my phone was the only thing on hand and I already measured and the PSU I want to use will fit.

 

Oh hell yeah! Now that's thinking! It's a very efficient use of available space.

+rep

 

. . . So does anybody know what the 90 angle cord is called that leads from the PSU to the back of the case?

 

Kettle plug extension lead perhaps?

 

are you really going to put 2 240mm rads in that box like your title says?

 

Yup thats the plan/ what I am trying to pull off

 

well
im watchin
and here i thought that i was crazy
welcome to the club

 

Much better use of space, you should definitely be able to fit 2x240mm rads.

 

Thanks guys but do any of you guys know what type of plug the lian li A05-B uses for the PSU thats what I need for the PSU mod.

 

lol I'm not crazy I'm Insane lol

 

I dunno if you can buy them but you can definitely make one.

 

that line is blurred too often
so we all just fall in the same club
my local state hospital wont accept me for being
so i made a club

 

These? or these?

They are called IEC plugs

Should be available from an eletronics supplier in your part of the world.

 

Hey llH4VOKll Love the mod so far.


Have you considered removing the PSU from the casing and just mount the plug on the back. It would remove the need for the 90 deg power cable and allow for a smaller foot print. Anyways the 90 deg power cord is a PC to Monitor Right Angle Extension Cord.

PC to Monitor Right Angle Extension Cord

Right Angle Power Cord

 

Got the rad in today and wow HW labs makes one hell of a rad my camera phone doesn't even due justice those of you with stealth rads know what I'm talking about the fins on this thing are crazy. Other news got a great deal on a silverstone 1000watt psu for $125 bucks modular too so I went ahead and ordered the short cable kit and the scythe fans too they will be here by next week. Hopefully with my next paycheck I can buy a i7 board for harbinger damn what I wouldn't give for a sponser lol

 

new 240mm rad location

Thanks to Craigbru's measurements I fount a even better spot for the second 240mm rad above the RAM slots running on the opposite side of the case I'm going to wait until I get the 1000watt PSU in so I know there wont be any clearance issues. Updates soon

 

What SilverStone PSU did you get? I've got a 1000 watt Olympus that I love quite a bit.

 

I got the ST1000 couldn't pass up that deal new for 125 bucks

 

Wow.. Now I thought I was insane fitting an ATX board in an SG03 and watercooling it as well as SLI but your acting as though insanity is a goal and your going for gold.... please keep up the work, its awsome....