This project is Sponsored by In Win Here's the case that In Win mailed me. It's called the Matrix and is a lot smaller than most other cases I've worked with. I start once I get my paint!
So here's the case And that's how big it is The side has a vent that comes off for easy cleaning. This one is staying off This is how the front opens The bottom has a bay for a card reader or something The back let's you guide all your cables through one slot at the bottom It can also be opened or removed At the bottom back are tabs You lift up the two tabs and pull out Then you remove the faceplate like any other case And only then can the side be taken off Here the case is standing on its back as I remove the 5.25 bay Then there's this plastic shroud. It's probably for the Processor air duct? And there's the inside
It seems like a well constructed case. I'm curious how you're going to incorporate the Buddha theme in. Painted panels?
I don't like how you have to remove the faceplate to remove the side. Looking forward to further developments!
Sorry for a such a HUGE gap in updates. I got to a point where I was sick of modding and really needed a vacation from it. Now that I'm rested, let's finish... I'll paint the left side once I cut out the mesh for the window I cut out most of the mesh, but I still need to get it cleaned up I made the right side sky blue I bought some bamboo! And cut them to around 6 inches. Each cut didn't have to be exact. I think varying heights will look more natural It took a couple of hours to get enough made to cover approximately 18 inches. My hand is killing me!
I photocopied my own hand I then sent the image to www.CrazyPC.com who cleaned the image up And made me some UV Window etches I cut out a small piece of Plexi And I cleaned up the window Then I carefully applied the image to the glass The blue is the UV color on the inside of the glass Here is from the outside And backlit with UV
I made the front bottom blue to match Then applied the glue and bamboo with the Chinese characters for HOPE Then I put the chinese charaters for PEACE on the left side
It's a really bizarre contrast between the bamboo and 2001-style case. I'm curious to see how this goes. I think it would be interesting to use the bamboo for grills. Leave the outside futuristic, but have the windows filled with 'boo.