Hi bit-tech user´s I will present my project which is currently in progress I'm making a new modding to this box that was already installed in three different ways this will be the 4th version of this box. Hardware to be used. < Hardware > Processor: Intel Core2 Quad Q6700 2.66 OC 3.4 Motherboard: Asus P5Q Deluxe Memories: OCZ DDR2 PC2-9200 FLEXXLC EDITION Graphic Card: Nvidia XFX 285GTX 1G Hard Drive: Raptor 37G 10000 RPM Power supply: CORSAIR 620W Modular Case: Raidmax Scorpio 868 < Watercooling > Processor: EK Supreme Memories: OCZ DDR2 PC2-9200 FLEXXLC EDITION Pump + Reservoir: ALPHACOOL AGB-EHEIM 600 STATION II 12V MOLEX Radiator: BLACK ICE STEALTH GTX-LITE-PRETO 360 Connectors: INNOVATEK G1/4 Tube: INNOVATEK TUBO 8/10 Parede rigida Liquid: FESER ONE UV BLACK Fans: 3 X REVOLTEC LEDS RED 120MM + 2 X REVOLTEC LEDS RED 80MM
The first images of the feet of the case. without being filed and sanded. After filed and sanded. I used two sides of an old case to make the false interior panels. Only for those who can my uber leet tractor to plow, in my hands fly up to 5 km hour hahahahhahahah Some work done. Next phase will be stripping all the paint of the case make small prominors missing for routing cables and paint, the cables will not carry sleeve will all be replaced with black cable and for whom no noticed this source case is ATX has been changed to BTX. I leave here some pictures of pre assembly just to see if everything is all right, there are 2 acrylic pieces that are already made but I do not have photos i will take them later.
+ 2 photos of acrylics that were missing one of the front to replace the original and another for the top
This is spooky. We use the same alias, more or less, and you're doing a mod somewhat similar to my first one (Purple Dragon). Looks good so far!
Mini update I leave a mini update, since the box had three different layers of paint could not finish everything today. Phase 1 rivets out. Phase 2 spread paint stripper. Phase 3 scrape.
