Having used quite a few Phobya products in my most recent project "Liquid Skeleton" I thought i'd write a review or two. Item description 1/2" ID 3/4" OD compression fitting in Black Nickel finish (G1/4 thread) Manufacturer Phobya Cost £3.29 Supplier The Water Cooling Shop Description and overview Compression fitting for use with 1/2" ID 3/4" OD Tubing. The item comprises of 3 parts. the main body, the knurled compression band and the "O" ring. The fitting comes fully assembled and although the compression band must be removed to fit the hose, the "O" ring should never be removed. Packaging and first impressions. The fitting comes packaged all on its own in a very simple plastic wrapper somewhat reminiscent of a small packet of salted nuts, both in the feel of the packaging and the noise it makes when you try to open it. The packaging does not scream quality at you, but then neither are you left wondering just how much of the money you paid for the fitting went into the packaging and not the item itself. So a bit of a double edged sword and a line that must be a hard one to walk for a manufacturer. Personally as long as the packaging does its job it's all I ask and as the majority of PC components these days are bought on-line there is very little need for the packaging to have shelf presence and "Wow" factor to attract you to them in a shop. The similarities with packets of nuts didn't end there though, it took a considerable amount of force to get the little packet open, and get the little bleeder out, and whereas with a bag of nuts should you apply too much force and the packet open suddenly you could potentially cover the surrounding area with nuts, the weight and heft of the content of this packet gave the distinct impression that get it wrong and you could potentially put a dent in your ceiling. Still I guess you could always just snip the top off with a pair of scissors! Once out of its protective wrappings the fitting could be examined. It has a quality feel to it, aided by its weight and a reasonable quality finish. As I mentioned there's a feeling of heft to it, a feeling that if thrown it would do substantial damage to whatever it hit. (It does in fact weigh in at 40g). I wouldn't say it's the best finish available out there, certainly other manufacturers have components that are finished to a much higher standard than this, but then they cost 2-3 times more. By comparison there are also other brands on the market that have an inferior finish to them that compete at the same price point. Instructions Simply put it doesn't come with any, and to be honest if you need instructions for a compression fitting you probably shouldn't be allowed near a computer without supervision, let alone be undertaking an activity which potentially involves mixing water and electricity. Fitting. The Compression fitting comes fully assembled necessitating the removal of the compression collar to insert the hose onto the main body. In fiddling with the part while reviewing it I turned the compression band fully clockwise to see just where the end of the thread would be so as I would be better informed when tightening with the hose in situ. having reached the end of its thread it then proved very difficult to undo, necessitating the use of a set of pliers. Whereas I wouldn't necessarily call this a fault it is something to be wary of, and it certainly induced a degree of panic in me when for a moment I thought I'd got it stuck. Performance and Quality. In days of yore a compression fitting only had one job to do, namely keep the water from spilling over your valuable components. Alas the life of a modern compression fitting is not as simple as its forbears. the fittings of today have to this, of course they do, but they have to do this and look sexy at the same time. The sample for this review comes dressed in the very latest black Nickel outfit, however if you prefer your suits more traditional the range is also available in the equally stunning Chromed Nickel finish. I fitted the Compressions using PTFE tape to supplement the "O" ring seal. In total 6 units were tested and over a 2 month period no leaks have been detected, so I guess this not only looks good but gets the job done. Conclusion. Good quality fittings at a very reasonable price. Available in two finishes, time and money looks to have been spent on the product rather than fancy packaging. Good points. Price Good finish Bad points. feel and look of packaging does not give impression of quality product within. Would I want to spend more to make the packaging better? No. How could the product be improved? As a product range it could perhaps be made available in a larger variety of colours. I'd suggest matt black and gloss black as well as perhaps red and white.
I was supplied with some of these and I can say they are great Lovely finish and easy to use. For the price you can't go wrong... (I'll put a mention in my log when I get round to doing one)
These are awesome. Well worth the money. Wish I read your review before I played with mine... got mine stuck too (oooerrrr!!) and had to get the pliers out to remove the collar. Caused a slight nick but nothing that has harmed performance. They really should put some child warning sticker on the side of these
