I really need to get my water cooling rig back together, air cooling just doesn't cut it for me. Keep up the good work Pete. Glad you are making me going back to water cooling.
Pete, I'm thinking of having a go at water cooling after looking at this! What is the Xigmatec like to work with?
Fairly good,very spacious the only realy cons are the reinforing strips behind the HDD mounts and the reinforcing strips on the front pannel. And how damn tight they tighten all of the screws!!!
Thanks Pete Do you think you could fit another rad in there by removing some of the hd enclosures at the bottom of the case?
You could fit a 240mm rad, but you'd have to drill a fan hole. Personally I'm put it upright in the 5.25" bays though. Why would you need that much cooling anyway? My Tygon tubing is now for sale...
I probably won't tbh! But planning ahead i may go SLI and then move the GPU's onto a seperate loop. do you think that would be excessive? On a side note whilst i have your attention! can you recommend any other cases for watercooling?
Mate if your Tygon really is for sale, PM me with the details . Bought a load of this UV Blue PVC stuff for 83p a metre and it's perfectly usable, but god do I miss the Tygon. Dug some old stuff out and cleared it up for a few bits on my current build, just so I have a piece of hose I can squeeze to bleed easily. Oh and there's no such things as too much cooling.
Check my forsale thread in the marketplace And there is, as if your cooling a 2500k and a 560TI, a 360mm will be more than enough...
Cheers, I'll have a look. Aye I know, but I'm a bit of a passive freak. That rads the aquacomputer 1800, meant for 12 x 120 fans, but I run it with none. Not superb temps but silence is more important for me. Got two 360s, one of which will be going on a Q6600 + 2x 8800 GTXs I'll be doing soon as a replacement HTPC box, that's definetly going to need fans .
I'd say a RX360 will work with some good fans Whack it on one loop with a D5 for high flow and you'll be sorted
Oooh I know one guy on here runs 3 580's off a RX360 with good temps in a 800D, and he's looking to add another rad for CPU, which is a pain for those cases. I'd personally say a RX360 and a RX240 just to be sure, but it's going to be a squeeze + modding in a 700D