1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Case Mod - In Progress Project: Chocolate Temptation-Update 4 June - I have got Sick & Facebook Page!

Discussion in 'Project Logs' started by KoSoVaR^, 23 Jun 2011.

  1. Niel

    Niel What's a Dremel?

    Joined:
    18 Sep 2011
    Posts:
    24
    Likes Received:
    1
    Sleeving the pump.

    You have done a nice sleeving job. Why did you take the wires of the pump?

    Good progress and nice stuff you got there. I am looking forward to the next update..
     
  2. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    hehe almost, i tried but had to bad light...yeah i think that too :), a white text or logo would have been nice too :)

    Great to hear! Hehe...thank you :)

    thank you!
    i had to because i would not use the 4 and 3 pin connector cables, first i wanted to make my own 3pin cable...but i already had one at home and i decided to sleeve it and solder it on the pump, and why i did this it simply because my fan controller can handle the certain (W)/watts that is specified for the pump i have...

    Feel free to ask if there are any more questions!

    /Kosovar!
     
  3. rayson

    rayson Damn sure it was legal

    Joined:
    23 Jul 2010
    Posts:
    238
    Likes Received:
    0
    i like the blue writing on it
     
  4. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    :O how could you :O? ^^
     
  5. Niel

    Niel What's a Dremel?

    Joined:
    18 Sep 2011
    Posts:
    24
    Likes Received:
    1
    Thanks it makes sense.. Looking forward to see your final result.. Thumbs up!
     
  6. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    Good to hear that, Im looking forward to it aswell :D! tont forget to rep me and subb for updatenotifications :)

    /Kosovar
     
    skreenname likes this.
  7. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    I have some very good news for the peaople!

    Patriots wanted to be with and help me with the project and sponsor me with a Pyro 120GB Sata III SSD, the power of the SSD will raise the system to a completely different level of performance!

    Thank you Sabine for all you help!
    Visit and like Patriot on Facebook!

    [​IMG]

    [​IMG]
     
  8. Nutman

    Nutman Never stuck with stock

    Joined:
    21 Oct 2008
    Posts:
    2,291
    Likes Received:
    59
    Ooooh, nice! And it fits the colour scheme?
     
  9. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    yes it does, its like very dark brownish :D! awsome!
     
  10. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    Time for an update to the patriotic people ... or what do you say?
    My mother called me at work to a post office had come home with a small and lightweight package ... my thoughts to this was totally unexpected ... I sat long on what the hell was able to come to me at this time ...Was it from BitsPower or Lamptron? I asked my mom to open and she said it was a "pyromaniac something" ... I laughed, obviously quite high and I did know exactly what had arrived ... my Patriot PyroII SataIII (6GB / s) SSD had arrived barely 20 hours after the sponsorship deal! Talk about fast first class delivery!

    Less nagging and lot of pictures, can not say more that it has a very seductive look and subtle details that go the extra mile.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Once I wait for my package, it has fallen in a bit sleevingjobs, it can be nice to train your fingers now and then :p this is what I have had time for so far:)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  11. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    I will give you guys a sneakpeak :), be ready for tomorrow's update!

    [​IMG]

    The box apperantly had a big hole in the side, it was bigger than my fist, and i could shove my hand thru there, i hope all the stuff are inside there!

    /Kosovar
     
  12. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    One more sneaky picture for the peaople!
    [​IMG]
     
  13. Nutman

    Nutman Never stuck with stock

    Joined:
    21 Oct 2008
    Posts:
    2,291
    Likes Received:
    59
    HWLabs Cheesecake ;)

    But why the sudden introduction of blue sleeving?
     
    Last edited: 3 Oct 2011
  14. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    Yeah :D! The rads are just awsome!

    ahaa... im doing a sleevejob to someone here in sweden :)
     
  15. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    Now it's finally time for an update, I was quickly take some photos before you should throw himself into bed ... I'm completely f***ing exhausted after today's work, i have been like damn tired all day :/... But now I will make this long awaited update for you guys ....which also has done so I can finally start putting the dremel into the case! "Hurr-array"!

    I simply must thank Adrian from "Special Tech" because he shows interest in my project by sponsoring me with these delights!;
    1x Hardware Labs Black Ice® GT Stealth 120mm Single X Flow Radiator Black
    1x Hardware Labs Black Ice® GT Stealth 240mm XFLOW Radiator
    1x 500 x 500 x 1mm Brushed Aluminium Panel : Gold
    4x Neoprene Rubber Edging Trim (1m)
    1x Tubing Cutter
    1x 500ml Squeezy Bottle for filling Watercooling Systems
    1x Koolance 1/4" Thread Male to Male Coupling Adapter Black
    1x Bitspower Mesh Radgard 240 Dual Radiator Grill Black
    1x Bitspower 1/4" Thread Universal T Fittings Matt Black

    [​IMG]


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    I found some gold!...I'm rich !

    [​IMG]

    U-channel and the hosecutter

    [​IMG]

    The rads...I'm in love again <3

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    Unfortunately, these items become lost or stolen when it was transported,you can se the large hole on the secont photo :(

    1x Koolance 1/4" Thread Male to Male Coupling Adapter Black
    1x Bitspower 1/4" Thread Universal T Fittings Matt Black

    This is coming to me soon together with some replacements :), Adrian is a great dude! Cheers!
    1x Bitspower Mesh Radgard 240 Dual Radiator Grill Black
     
    Last edited: 4 Oct 2011
  16. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    Those black ice rads are fantastic, I have used them numerous times before and they really are awesome. Sucks about the missing bits though dude :(.
     
  17. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    I have herd some good things about them, eaven that theese ones cool as good or eaven better than the EK rads :), theese will do so well for the project, I have started making the radholder/border/outtakeplate i will need something to bent the aluminum...im having trouble finding one :(
     
  18. aRkangeL

    aRkangeL MegaRUSH

    Joined:
    29 Nov 2010
    Posts:
    282
    Likes Received:
    2
    Great and tiny rads :D:rock:
     
  19. KoSoVaR^

    KoSoVaR^ Professional Sleever & Modder

    Joined:
    19 Dec 2010
    Posts:
    983
    Likes Received:
    29
    they are great! perfect for my needs and they look very nice and clean!
     
  20. The boy 4rm oz

    The boy 4rm oz Project: Elegant-Li

    Joined:
    10 Apr 2008
    Posts:
    5,297
    Likes Received:
    54
    The computer shop I work for stock both EK and Black Ice and the Black Ice are smaller and more efficient then the EK rads, plus they look a hell of a lot better lol.
     

Share This Page