Scratch Build – In Progress Project: GALLUZZO-I < 2 Aug. update: Swithes >

thank you guys! Glad you like the project!

 

​

update 19 - sleeving part 2 (list of all updates)

Hey guys, more sleeving coming! today I'm dealing with the 24-pin cable wiring and sleeving, the work doesn't need a lot of ecplanation, it's pretty much some pretty picture I had a chanche to take with my neighbour's impressive Canon30D

by the way, thanks Pietro



















that's it, more sleeving next week, enjoy your weekend!

 

Very good sleeving job

And congratulation for MOMT nominee!

 

That individual sleeving was impresive mate.

Really you have great skills and patience for this!!

The result of that sleeving was great algo mate.

See ya an keep going with this!!!

 

i really like the sleeve work

question: what tyoe of wires are you using? the ohms, volts, those things?

 

it's a 0.8mm² wire, resistance should be around 0.020 ohm/m (but i dont really care since the extensions are very short) and max current something near 5 A per wire.

Voltages are obviously -12 to 12 V of the 24pin connector

 

I checked better in the AWG spec list and found out it should be something very close to 18AWG

someone think i'd better go for 16AWG? I personally think it would be a little too overkill, but... hey I'm here to learn

(sorry for double post)

 

tnx. tnx. tnx.

 

​

update 20 - first system test (list of all updates)

Hey guys! I'm back!

Been a while since the last update, but I've been relly busy with some exam and i only had some spare days now during holidays for new updates!

Today I've made the firts test with the system inside the case. The work is far from being completed but this will be a good point to start new updates!

I started transfering the old system from it's original case



to the new tray



in place! standoffs were absolutely perfect (surprisingly enough)



then i tapped some holes for the pci support rails



and put it all back in the case



testing cables, psu and usb







and finally booted from the new case!





from the first tests I can tell that:

• noise is reduced to a whisper! With all fans on 5V the system is absolutely inaudible!
• default-CPU peak tempreature didnt change
• default-GPU peak teperature dropped a little, not much trough
• OC-CPU peak temperature has dropped by 3°C approx.
• OC-GPU peak temperature has dropped by 8°C approx.

 

Very nice result & the whole setup looks nice, congrats & rep .

 

Nice job on the cabling its looking very professional

 

Hello guys, I am proud to announce you that Drako.it accepted to sponsor the project with some goodies!

I'll be proud to show you more updates very soon about the new features!

Thank you very much to the friends at Drako who believed in the GALLUZZO project!

​

 

Lotta mod skills! Congrats for the sponsorship!:
Psst! Ask drako a pair of these: Antec / Innovatek Watercooled Cool-Power 500W PSU - . He got it in the EOL list (fineserie),they look killer!
Mod on!

 

they look naughty, but the project is all about efficient air cooling so I don't think those would fit very well

 

​

update 21 - Sponsorship package (list of all updates)

Hey guys! It's been quite some time since I showed up, I'm having some troubles in real life so updates won't be as fast as they used to be some time ago...

However, PACKAGE ARRIVED!!!

Thanks to my friends @Drako.it that believed in the project and decided to support it with some goodies, there is what I got this time:



















And of course thank you very much to all sponsors involved!!!

Phanteks
BitFenix
Lamptron
SilverStone
Revoltec
DimasTech​

​

Some update incoming very soon!!!

 

Congrats Liuuuu for these cool sponsors!!!!

 

​

update 22 - Thumb screws and PCI slots (list of all updates)

Hey guys, just a quick one to show the DimasTech thumb screws and the SilverStone PCI aero slots.












and here is a little hint on what I'll be working on in the days to come

oh... I love modding sleeved cables

 

Hmmmm MOBO with thumbscrews... interesting
I hope their big heads doesn't burn the mobo

 

I hope these pins will stay if you pull too hard. I had hard times succeeding with that when I tried.
Nice project

 

yeah congrats to the sponsorship! the case getting really neat!