I was somewhat confused why all of a sudden I had half a dozen folk on my overtake list I looked on HFM.NET to discover my 12 core 980X at 4109MHz was only producing 2,414.7 PPD on P6097 (R0, C24, G52). The setup has been chugging away folding undisturbed for over a year now. The CPU is generally giving at least 30k PPD. I only have two of the three graphics cards folding on that rig and it is basically painful. Any ideas as I haven't the heart the throw it away as it's sorta against the rules?
I have also paused when done on all the GPUs as the CPU WU is taking 2 to 2 and a half hours a frame. Will see if that helps later this morning.
had a similar problem myself, i had to remove the beta flag i had set and re-download the [non-beta] core to get it back to 'normal'
Something is wrong, the worst I've ever done on a 6097 was a TPF of 06:18 (2600K @ 4500MHz CPU folding only). In these extreme circumstances you would be entitled to dump it as the science is not going to be helped by the long delay in returning the WU. Personally I would clear everything out and start again from scratch.
With GPUs stopped, TPF is 1h38m and PPD is 622.4. Fabulous! It is not even 4am, so I will sort it when I am properly awake with a clean install by the look of it
You running Linux? As the same happened to me on my Ubuntu installation and I couldn't figure out what the problem was, ended up re-installing the OS as it didn't take that long to do. :/
There's a thread on the official forum regarding this project that might be of interest .... http://foldingforum.org/viewtopic.php?f=55&t=20604&start=0
Complete FAH reinstall. First up got a P6098 with 1593 points credit with 10 cores dedicated and around 12 hours elapsed time. Now picked up a P6097 (again) and HFM reckons an awesome 3113.0ppd. What is going on?
BTW, I turned on the two GTX460s as well and they are producing 20627ppd between them on same machine, which is more like it
Not sure if this helps or whether this is rubbing salt in your wound, but I've had a couple of 6097's yesterday Code: [20:45:42] - Preparing to get new work unit... [20:45:42] Cleaning up work directory [20:45:42] + Attempting to get work packet [20:45:42] Passkey found [20:45:42] - Will indicate memory of 16360 MB [20:45:42] - Connecting to assignment server [20:45:42] Connecting to http://assign.stanford.edu:8080/ [20:45:43] Posted data. [20:45:43] Initial: 8F80; - Successful: assigned to (128.143.231.202). [20:45:43] + News From Folding@Home: Welcome to Folding@Home [20:45:43] Loaded queue successfully. [20:45:43] Sent data [20:45:43] Connecting to http://128.143.231.202:8080/ [20:45:45] Posted data. [20:45:45] Initial: 0000; - Receiving payload (expected size: 3811883) [20:46:21] - Downloaded at ~103 kB/s [20:46:21] - Averaged speed for that direction ~461 kB/s [20:46:21] + Received work. [20:46:21] Trying to send all finished work units [20:46:21] + No unsent completed units remaining. [20:46:21] + Closed connections [20:46:21] [20:46:21] + Processing work unit [20:46:21] Core required: FahCore_a3.exe [20:46:21] Core found. [20:46:21] Working on queue slot 07 [January 25 20:46:21 UTC] [20:46:21] + Working ... [20:46:21] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 07 -np 8 -checkpoint 30 -verbose -lifeline 2020 -version 634' [20:46:21] [20:46:21] *------------------------------* [20:46:21] Folding@Home Gromacs SMP Core [20:46:21] Version 2.27 (Dec. 15, 2010) [20:46:21] [20:46:21] Preparing to commence simulation [20:46:21] - Looking at optimizations... [20:46:21] - Created dyn [20:46:21] - Files status OK [20:46:22] - Expanded 3811371 -> 4169428 (decompressed 109.3 percent) [20:46:22] Called DecompressByteArray: compressed_data_size=3811371 data_size=4169428, decompressed_data_size=4169428 diff=0 [20:46:22] - Digital signature verified [20:46:22] [20:46:22] Project: 6097 (Run 0, Clone 94, Gen 65) [20:46:22] [20:46:22] Assembly optimizations on if available. [20:46:22] Entering M.D. [20:46:28] Mapping NT from 8 to 8 [20:46:28] Completed 0 out of 500000 steps (0%) [20:53:29] Completed 5000 out of 500000 steps (1%) [21:00:31] Completed 10000 out of 500000 steps (2%) [21:07:35] Completed 15000 out of 500000 steps (3%) [21:12:53] - Autosending finished units... [January 25 21:12:53 UTC] [21:12:53] Trying to send all finished work units [21:12:53] + No unsent completed units remaining. [21:12:53] - Autosend completed [21:14:36] Completed 20000 out of 500000 steps (4%) [21:21:46] Completed 25000 out of 500000 steps (5%) [21:30:07] Completed 30000 out of 500000 steps (6%) [21:37:23] Completed 35000 out of 500000 steps (7%) [21:44:25] Completed 40000 out of 500000 steps (8%) [21:51:26] Completed 45000 out of 500000 steps (9%) [21:58:29] Completed 50000 out of 500000 steps (10%) [22:05:29] Completed 55000 out of 500000 steps (11%) [22:12:31] Completed 60000 out of 500000 steps (12%) [22:19:29] Completed 65000 out of 500000 steps (13%) [22:26:27] Completed 70000 out of 500000 steps (14%) [22:33:26] Completed 75000 out of 500000 steps (15%) [22:40:33] Completed 80000 out of 500000 steps (16%) [22:47:35] Completed 85000 out of 500000 steps (17%) [22:54:37] Completed 90000 out of 500000 steps (18%) [23:01:38] Completed 95000 out of 500000 steps (19%) [23:08:38] Completed 100000 out of 500000 steps (20%) [23:15:38] Completed 105000 out of 500000 steps (21%) [23:22:38] Completed 110000 out of 500000 steps (22%) [23:29:38] Completed 115000 out of 500000 steps (23%) [23:36:38] Completed 120000 out of 500000 steps (24%) [23:43:40] Completed 125000 out of 500000 steps (25%) [23:50:41] Completed 130000 out of 500000 steps (26%) [23:57:42] Completed 135000 out of 500000 steps (27%) [00:04:41] Completed 140000 out of 500000 steps (28%) [00:11:41] Completed 145000 out of 500000 steps (29%) [00:18:40] Completed 150000 out of 500000 steps (30%) [00:25:39] Completed 155000 out of 500000 steps (31%) [00:33:19] Completed 160000 out of 500000 steps (32%) [00:40:18] Completed 165000 out of 500000 steps (33%) [00:47:19] Completed 170000 out of 500000 steps (34%) [00:54:17] Completed 175000 out of 500000 steps (35%) [01:01:16] Completed 180000 out of 500000 steps (36%) [01:08:14] Completed 185000 out of 500000 steps (37%) [01:15:14] Completed 190000 out of 500000 steps (38%) [01:22:13] Completed 195000 out of 500000 steps (39%) [01:29:13] Completed 200000 out of 500000 steps (40%) [01:36:11] Completed 205000 out of 500000 steps (41%) [01:43:11] Completed 210000 out of 500000 steps (42%) [01:50:09] Completed 215000 out of 500000 steps (43%) [01:57:09] Completed 220000 out of 500000 steps (44%) [02:04:08] Completed 225000 out of 500000 steps (45%) [02:11:08] Completed 230000 out of 500000 steps (46%) [02:18:09] Completed 235000 out of 500000 steps (47%) [02:25:10] Completed 240000 out of 500000 steps (48%) [02:32:10] Completed 245000 out of 500000 steps (49%) [02:39:10] Completed 250000 out of 500000 steps (50%) [02:46:10] Completed 255000 out of 500000 steps (51%) [02:53:10] Completed 260000 out of 500000 steps (52%) [03:00:09] Completed 265000 out of 500000 steps (53%) [03:07:10] Completed 270000 out of 500000 steps (54%) [03:12:53] - Autosending finished units... [January 26 03:12:53 UTC] [03:12:53] Trying to send all finished work units [03:12:53] + No unsent completed units remaining. [03:12:53] - Autosend completed [03:14:10] Completed 275000 out of 500000 steps (55%) [03:21:09] Completed 280000 out of 500000 steps (56%) [03:28:10] Completed 285000 out of 500000 steps (57%) [03:35:10] Completed 290000 out of 500000 steps (58%) [03:42:16] Completed 295000 out of 500000 steps (59%) [03:49:16] Completed 300000 out of 500000 steps (60%) [03:56:14] Completed 305000 out of 500000 steps (61%) [04:03:15] Completed 310000 out of 500000 steps (62%) [04:10:15] Completed 315000 out of 500000 steps (63%) [04:17:22] Completed 320000 out of 500000 steps (64%) [04:24:24] Completed 325000 out of 500000 steps (65%) [04:31:32] Completed 330000 out of 500000 steps (66%) [04:38:35] Completed 335000 out of 500000 steps (67%) [04:45:36] Completed 340000 out of 500000 steps (68%) [04:52:36] Completed 345000 out of 500000 steps (69%) [04:59:34] Completed 350000 out of 500000 steps (70%) [05:06:32] Completed 355000 out of 500000 steps (71%) [05:13:40] Completed 360000 out of 500000 steps (72%) [05:20:41] Completed 365000 out of 500000 steps (73%) [05:27:38] Completed 370000 out of 500000 steps (74%) [05:34:37] Completed 375000 out of 500000 steps (75%) [05:41:36] Completed 380000 out of 500000 steps (76%) [05:48:36] Completed 385000 out of 500000 steps (77%) [05:55:36] Completed 390000 out of 500000 steps (78%) [06:02:35] Completed 395000 out of 500000 steps (79%) [06:09:34] Completed 400000 out of 500000 steps (80%) [06:16:33] Completed 405000 out of 500000 steps (81%) [06:23:30] Completed 410000 out of 500000 steps (82%) [06:30:28] Completed 415000 out of 500000 steps (83%) [06:37:27] Completed 420000 out of 500000 steps (84%) [06:44:24] Completed 425000 out of 500000 steps (85%) [06:51:23] Completed 430000 out of 500000 steps (86%) [06:58:23] Completed 435000 out of 500000 steps (87%) [07:05:23] Completed 440000 out of 500000 steps (88%) [07:12:22] Completed 445000 out of 500000 steps (89%) [07:19:24] Completed 450000 out of 500000 steps (90%) [07:26:23] Completed 455000 out of 500000 steps (91%) [07:33:23] Completed 460000 out of 500000 steps (92%) [07:40:22] Completed 465000 out of 500000 steps (93%) [07:47:20] Completed 470000 out of 500000 steps (94%) [07:54:17] Completed 475000 out of 500000 steps (95%) [08:01:16] Completed 480000 out of 500000 steps (96%) [08:08:17] Completed 485000 out of 500000 steps (97%) [08:15:17] Completed 490000 out of 500000 steps (98%) [08:22:16] Completed 495000 out of 500000 steps (99%) [08:29:14] Completed 500000 out of 500000 steps (100%) [08:29:16] DynamicWrapper: Finished Work Unit: sleep=10000 [08:29:26] [08:29:26] Finished Work Unit: [08:29:26] - Reading up to 12102336 from "work/wudata_07.trr": Read 12102336 [08:29:26] trr file hash check passed. [08:29:26] edr file hash check passed. [08:29:26] logfile size: 53774 [08:29:26] Leaving Run [08:29:28] - Writing 12189786 bytes of core data to disk... [08:29:30] Done: 12189274 -> 11286551 (compressed to 92.5 percent) [08:29:30] ... Done. [08:29:31] - Shutting down core [08:29:31] [08:29:31] Folding@home Core Shutdown: FINISHED_UNIT [08:29:34] CoreStatus = 64 (100) [08:29:34] Unit 7 finished with 96 percent of time to deadline remaining. [08:29:34] Updated performance fraction: 0.961439 [08:29:34] Sending work to server [08:29:34] Project: 6097 (Run 0, Clone 94, Gen 65) [08:29:34] + Attempting to send results [January 26 08:29:34 UTC] [08:29:34] - Reading file work/wuresults_07.dat from core [08:29:34] (Read 11287063 bytes from disk) [08:29:34] Connecting to http://128.143.231.202:8080/ [08:31:11] Posted data. [08:31:11] Initial: 0000; - Uploaded at ~113 kB/s [08:31:11] - Averaged speed for that direction ~113 kB/s [08:31:11] + Results successfully sent [08:31:11] Thank you for your contribution to Folding@Home. [08:31:11] + Number of Units Completed: 350 [08:31:15] Trying to send all finished work units [08:31:15] + No unsent completed units remaining. [08:31:15] - Preparing to get new work unit... [08:31:15] Cleaning up work directory [08:31:15] + Attempting to get work packet [08:31:15] Passkey found [08:31:15] - Will indicate memory of 16360 MB [08:31:15] - Connecting to assignment server [08:31:15] Connecting to http://assign.stanford.edu:8080/ [08:31:16] Posted data. [08:31:16] Initial: 8F80; - Successful: assigned to (128.143.231.202). [08:31:16] + News From Folding@Home: Welcome to Folding@Home [08:31:16] Loaded queue successfully. [08:31:16] Sent data [08:31:16] Connecting to http://128.143.231.202:8080/ [08:31:18] Posted data. [08:31:18] Initial: 0000; - Receiving payload (expected size: 3812125) [08:31:23] - Downloaded at ~744 kB/s [08:31:23] - Averaged speed for that direction ~518 kB/s [08:31:23] + Received work. [08:31:23] Trying to send all finished work units [08:31:23] + No unsent completed units remaining. [08:31:23] + Closed connections [08:31:23] [08:31:23] + Processing work unit [08:31:23] Core required: FahCore_a3.exe [08:31:23] Core found. [08:31:23] Working on queue slot 08 [January 26 08:31:23 UTC] [08:31:23] + Working ... [08:31:23] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 08 -np 8 -checkpoint 30 -verbose -lifeline 2020 -version 634' [08:31:23] [08:31:23] *------------------------------* [08:31:23] Folding@Home Gromacs SMP Core [08:31:23] Version 2.27 (Dec. 15, 2010) [08:31:23] [08:31:23] Preparing to commence simulation [08:31:23] - Looking at optimizations... [08:31:23] - Created dyn [08:31:23] - Files status OK [08:31:23] - Expanded 3811613 -> 4169428 (decompressed 109.3 percent) [08:31:23] Called DecompressByteArray: compressed_data_size=3811613 data_size=4169428, decompressed_data_size=4169428 diff=0 [08:31:23] - Digital signature verified [08:31:23] [08:31:23] Project: 6097 (Run 0, Clone 57, Gen 72) [08:31:23] [08:31:23] Assembly optimizations on if available. [08:31:23] Entering M.D. [08:31:29] Mapping NT from 8 to 8 [08:31:29] Completed 0 out of 500000 steps (0%) [08:38:24] Completed 5000 out of 500000 steps (1%) [08:45:17] Completed 10000 out of 500000 steps (2%) [08:52:10] Completed 15000 out of 500000 steps (3%) [08:59:04] Completed 20000 out of 500000 steps (4%) [09:05:58] Completed 25000 out of 500000 steps (5%) [09:12:53] - Autosending finished units... [January 26 09:12:53 UTC] [09:12:53] Trying to send all finished work units [09:12:53] + No unsent completed units remaining. [09:12:53] - Autosend completed [09:12:53] Completed 30000 out of 500000 steps (6%) [09:19:48] Completed 35000 out of 500000 steps (7%) [09:26:52] Completed 40000 out of 500000 steps (8%) [09:33:59] Completed 45000 out of 500000 steps (9%) [09:41:50] Completed 50000 out of 500000 steps (10%) [09:51:07] Completed 55000 out of 500000 steps (11%) [09:58:29] Completed 60000 out of 500000 steps (12%) [10:07:21] Completed 65000 out of 500000 steps (13%) [10:15:18] Completed 70000 out of 500000 steps (14%) [10:22:18] Completed 75000 out of 500000 steps (15%) [10:29:37] Completed 80000 out of 500000 steps (16%) [10:37:28] Completed 85000 out of 500000 steps (17%) [10:45:49] Completed 90000 out of 500000 steps (18%) [10:53:57] Completed 95000 out of 500000 steps (19%) [11:03:57] Completed 100000 out of 500000 steps (20%) [11:16:38] Completed 105000 out of 500000 steps (21%) [11:24:22] Completed 110000 out of 500000 steps (22%) [11:31:43] Completed 115000 out of 500000 steps (23%) [11:40:36] Completed 120000 out of 500000 steps (24%) [11:53:46] Completed 125000 out of 500000 steps (25%) [12:23:08] Completed 130000 out of 500000 steps (26%) [12:46:09] Completed 135000 out of 500000 steps (27%) [12:57:44] Completed 140000 out of 500000 steps (28%) [13:07:51] Completed 145000 out of 500000 steps (29%) [13:44:23] Completed 150000 out of 500000 steps (30%) [13:58:54] Completed 155000 out of 500000 steps (31%) [14:11:14] Completed 160000 out of 500000 steps (32%) [14:19:14] Completed 165000 out of 500000 steps (33%) [14:27:40] Completed 170000 out of 500000 steps (34%) [14:34:33] Completed 175000 out of 500000 steps (35%) [14:41:28] Completed 180000 out of 500000 steps (36%) [14:50:11] Killing all core threads [14:50:11] Could not get process id information. Please kill core process manually Folding@Home Client Shutdown at user request. [14:50:11] ***** Got a SIGTERM signal (2) [14:50:11] Killing all core threads [14:50:11] Could not get process id information. Please kill core process manually Folding@Home Client Shutdown. I then played MW3 for a couple of hours, hence the "kill" Seems to be running fine on mine with the 6.34 CPU client on Win 7 X64 Ultimate, with the flags set as: Code: C:\Users\Gaming\Documents\Folding\FAH6.34-win32-SMP.exe -verbosity 9 -smp 8 -advmethods Yours is obviously running fine when it doesn't pick up these work units, judging by the score for the other unit you mention. I'm running a 2600k rig, so I wonder if anyone else can replicate your tpf etc...?
Finally seems to have sorted itself out... now running a P6098 on 10 cores at 27,855ppd alongside two GTX460s doing another 20627ppd. Cores are only at mid 60s Celsius and hottest GPU 70C due to cold weather!
Yep, Weird! I had rebooted several days before which made no difference, then suddenly it decided to work as ex[ected.
This 6097 WU just killed an Ubuntu VM on my i7-2600 that was previously doing 17k a day down to less than 6k. I hope whatever this problem is it doesn't come back.
