1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Motherboards motherboard issue

Discussion in 'Hardware' started by RustyTool, 17 Jul 2012.

  1. RustyTool

    RustyTool What's a Dremel?

    Joined:
    6 May 2012
    Posts:
    58
    Likes Received:
    0
    hey all,
    I have an asrock z77 extreme 4 board and a 2500k cpu
    I'm pretty noob at o/cing so I'd like your advice plz.
    I recently discovered that when setting vcore at 1.165 in bios , when stressing cpu at windows vcore jumps up to 1.35V , maybe more but I stop it before I see higher voltages. tried setting LLC at different levels (even automatic) , disabling C states and speed-step but vcore goes nuts. if I set v-core to 1.160V or 1.170V (without changing any other option)it's working normally keeping vcore at normal levels.
    I flashed bios at latest available but with no results.
    I also noticed that enabling/disabling speedstep doesn't make difference at any frequency and voltage , only c states do make difference.

    any ideas plz? :wallbash:
     
  2. RustyTool

    RustyTool What's a Dremel?

    Joined:
    6 May 2012
    Posts:
    58
    Likes Received:
    0
    anyone having the same issues?
     
  3. RustyTool

    RustyTool What's a Dremel?

    Joined:
    6 May 2012
    Posts:
    58
    Likes Received:
    0
    anyone owner of the z77 extreme 4 board could confirm please?
     

Share This Page