Hi all! I'm Hostiti, a french guy who started modding last year with The Green Way This time, mod is based on a Carbide Air 540. Each picture will be in b&w... But the finals pix will be in color. The HARDWARE Case : CORSAIR Carbide Air 540 blanc PSU : COOLER MASTER V850 Motherboard : Asus Maximus VII Ranger CPU : Intel i5 4690K RAM : Corsair vengeance pro 2x4Go GPU : VTX3D 280X Cooling: watercooling Home Made The WATERCOOLING Pomp Laing DDC-1Tplus + res 1 RAD XSPC EX360 2 RAD XSPC EX240 11 CORSAIR SP120 high perf 1 CORSAIR AF140 Quiet phanteks fan controller Waterblock CPU EK SUPREME HF WaterBlock EK-FC7970 temperature sensor XSPC + LCD display Coolant Mayhems red pastel fittings 10/16 First step, the case... Here is the part I need to remove to install a 240 radiator on the bottom : The bottom plate is ready to receive the radiator... Now I need to install the Temperature LCD display : Stay tune
Because I think that the case is not enough ventilate next to the PSU, I made a hole down the pump and I made an aluminium support to fix a fan to the pump : The hole : The support : The pump (and its heatsink) and the fan fixed above :
Hi all! Time is cooming for mounting hardware First with the introduction of the lower rad and its connection with the 360 front : The motherboard ... it goes to the hair ... Obviously, it'll be not easy to install an SLI / CF without dismantling the two fans At this point, it was unwise to forget to connect the front panel Placing the CPU waterblock ... Installing the top rad ... well ... there also should not forget to connect the 4 + 4 cpu By cons ... it's a little mess here:na: To be continued...
Here is some pics while waiting for the final photo My favorite... My little robot that I use to make my drain