Case Mod - In Progress Project TwinForceTower

Hi,

I love the build. It's very clean and I really like the through and through air flow design.
The 200mm fan at the bottom, I don't think it works well with the air flow in your case. Maybe you can put it under the midplate and have the air feed around the back of the motherboard tray also creating a slightly positive pressure in the case for dust prevention?

 

I decided that I will not use the fan more about this project, I will keep for the future.
Thanks anyway for the tip

 

Update Worklog!

Serving me a sheet of zinc courtesy of a carpenter friend of my father: D I have stretched the background that will later-wrapped.
I also started to draw prospective slots for SSD.





Now I have made this, a cover PSU plywood 4mm, is the first time that I enter into a carpentry work and since I'm used to with Frex,, you can well understand the smell of wood floors that has spread in the room

Despite everything, serving me some angular always in wood, came out just like I wanted it!
I am satisfied



Run-through








Wood filler and the holes are gone!



See you next time!

 

New updates:



I created a second bracket, built primarily for two purposes, in addition to further stiffen the structure: Bring midplate to "level" and supporting a second bracket that you will see later





Later I began to place the SSD in place



Under the midplate, took into account the dimensions of the tank / pump and power supply, I placed a cage for HDD slide (probably taken from some pre-assembled)



Serving me a bracket made from a profile "L" I raised the cage to allow the HDD to enter and exit without hitting the houses



Rehearsal (That will clamp removed, the angle must be adapted to the tank / pump)



Finally, these are the supports for the SSD viewed from behind: Two bolts M3 holding the SSD retainer to a sheet of 4mm plexy which in turn is held by two other M3 bolts that hold it to the latch plate of the mobo. It is also backlit by a white LED that "separates" in a sense from the background.




Any defects in the cuts will be covered by the film which will play all the "background"



Preview leds








See you next time!

 

UP

Let's start off with SSDs cool


I finished the second bracket



And this is the case with the plate further stiffened (now much more stable and flat)



PREVIEW small SSD (I know they're crooked)




I came the first radiator final 360 often well 60mm. Positioning it I saw that the holes were completely different, so I removed the ugly "brackets" of before and I created something that is not only functional even of aesthetic impact.



And here's the new bracket



That in comparison to the old one has nothing to do





The second





Then I took an angular aluminum and I prepared to cover all the holes and the radiator. Afterwards I think that will give him some more aesthetic touch.




All for today guys

 

New Update!

Small preview of all the work already done





I finally straightened out the plate of the motherboard that was definitely wrong



The SSD correctly mounted



Second bar coverage




Overview Front

 

Sorry for the long wait, but in addition to the expected new SLR (What I was crazy) I had many commitments.

Return to us!

Stavo pensando di creare una griglia per il radiatore ed è uscita questa:


I do not know yet if I'll put, I've got used to this plexy two days

Later, after taking the hand with inventor I created this:


And you say: "What?" (To put it clean )

Here it is mounted after doing sheet:


(Then it will be colored black)

Overview mounted cables and motherboard of "evidence" more decent





Also I'm also planning to put the stickers mainly on midplate but that will eventually be scattered everywhere:




Tell me what you think,
See you next time!

 

Today I am delighted to announce another sponsor who will support the project by supplying the components of the liquid and some cables sleevati.

Thank CoolForce by Nanoxia! Thanks Martin!

 

Is arrived!


























CoolForce by Nanoxia

 

The UP that everyone was waiting for!

After combining a bit of disgust,



I finally settled all corners and visible rivets that were ruining the bad plate.



Using endless amounts of sandpaper






Then I finally started to place fittings creating provisionally the final loop (Then of course I will have to remove all of the color)




Pending / video cards leave a tube that runs good area where surely will drop the remaining tubes



After that I also start to place the tubes






This is love:



Second attempt to bend the rigid pipe (The first was released a mixture of sagging accompanied by a bubble because of phono on at maximum asd)



Tubes placed




Other shortcuts



Small overview

 

UP

After the arrival of the video card (A 7950) I finally finished the loop, the pictures, you judgment




I also created a "fullcover" for the thermosphere








And instead this is the current situation of the main PC haha

 

Tell me what do you think

 

Hello guys, here I am back after a lot of time!

After the base color I started to decorate a little around the case with the wonderful stickers made in Germany by ModdingStylez, incredible quality!

-I Have plugged the hole for the dock on the front panel with a 4-port USB hub.

-I Created a counter to run cables from the motherboard to the side, so that they are visible (at least from my perspective)

Without another word I leave you to the photos, let me know what you think!

 

Stay tuned...

 

I like the idea and the layout of the case. Also the colourscheme is nice.

 

As regards the colors, it is not over yet

 

Finally I am back! After modding dedicated to the saint, here is a sink Reference fullcover become a theme!







Then mom Transcend provided me these beautiful ram aXeRam that match perfectly with the rest of the project! Here are some pictures:

 

Updated the first page to complete the configuration!
Stay tuned for the next up because they will be the Best update you ever seen

 

I really don't like the ordinary "box-shape computer", but I do really like this one. Don't ask me why, but I just do the whole thing seems interesting!

Good pictures btw, really good!