Hello to all ..... new update .... I painted the power of white, I have finished the midplate the psu, I attached the brackets of the tanks to the supports that I had created, I started the preparation of the fans and the radiator, and I entered the grills on the sides radiator ... what do you say? Stay tuned and thanks to all for the support
Hello everyone, small upgrade .. I installed the wb thermosphere Ek on the Inno3D gtx960 but unfortunately the card remained too bare so I decided to create a support for the two fans from the original vga and place them on either side of wb, I painted the white shells of the fans. I believe that this choice is a good mix so the vga will be cooled completely, What do you think of this choice? Do You Like it? Stay Tuned!!
Hello everyone ......... New arrival For Mod ..... I sincerely thanks Asrock for supported the project with this amazing motherboard "Asrock Z97 Extreme 6" Power and elegance at the same time, for info on the product, visit the link: http://www.asrock.com/mb/Intel/Z97 Extreme63.1/index.it.asp but now enjoy the pictures See you soon guys !!!
Hello guys .... a small preview with hardware installed on hold the last components what do you think? Stay Tuned!!! kok:
the watercooling on the gpu looks really nice peaking through the shroud. should perform nicely with the additional airflow around the vrm and such. i really like the blue color on the watercooling in general
Hi guys new arrival for the project Thaurus I sincerely thank Thermaltake for supporting the project with these fantastic products that I think of excellent quality and well built You can find the following material and other at this link http://www.thermaltake.com/cooler.aspx thanks again THERMALTAKE Thermaltake Pacific G1/4 PETG Tube 5/8” (16mm) OD Adapter – Chrome Thermaltake Pacific G1/4 Female to Male 20mm Extender – chrome Thermaltake Pacific G1/4 Female to Female 10mm Extender – Chrome Thermaltake Pacific G1/4 Male to Male 10mm Extender – Chrome Thermaltake V-Tubler PETG Tube 5/8” (16mm) OD 500mm 4 Pack Thermaltake Pacific G1/4 Stop Plug w/ O-Ring – Chrome/Black Commander FT – Touchscreen Fan Controller Stay Tuned !!!
Hello everybody new arrival for the Mod, Dimastech Black Push-Button with LED blue 19 mm I sincerely thank Dimastech for supporting the project with these elegant buttons. For info on the product you can visit the following link:http://shop.dimastech.it/pulsante-a...lack-19mm-id-azione-alternata-colore-led-blue Thanks again Dimastech Stay Tuned!!
Hello all ...... here's a little preview of the cables signed ModdingStylez that are coming for the project .... amazing job and fantastic colors .... for information on these products please visit the following link: https://www.facebook.com/ModdingStylez?fref=ts http://moddingstylez.de/ I can not wait to touch them and see them in person Emoticon heart Thank you very much Modding Stylez Stay Tuned ;-)
Hello everyone And here is the written adhesive and logos that will be signed Modding Stylez applied to mod Thaurus. Thank you so much modding Stylez for this fantastic work and for supporting the project ..... Thanks Again For other works and information visit this link: https://www.facebook.com/ModdingStylez?fref=ts Stay Tuned!!!
Hello everyone And here come the package from Modding Stylez ...... What can I say, everything was perfect, exceptional work and in more beautiful keychain created by hand. Thanks a lot Now we have to install everything Thanks again for the support modding Stylez and Matthias Bromel See you soon!!
I suppose you like your motherboard A LOT!!! (42 photos, I think is a record...) Like your mod, waiting updates hi
Hello to all ..... we arrived at the end of this mod, that is, first and foremost I would like to thank the guys of Hw legend and in particular Antonio for his kindness and professionality, all the sponsors who once believed in me and they have allowed me to build this project and to finish all the people who have followed the worklog ... thanks again. Let's move on to the project, as far as I'm concerned I'm quite satisfied and I'm very happy with how it is in the final stage, I wanted to include glass panels smoked, but it is unfortunately something went wrong, and then I had to put the plexiglass panels. Hope you like it........ Here are the final images: ...........Continue...........
As i mentioned before, the block peaking through the gpu shroud is such a nice feature. The bend going from the gpu -> cpu block is also neat! All in all, congratz with completing the build - wish i could find the time to complete mine soon...