1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scratch Build – In Progress Worklog: JP[μ]

Discussion in 'Project Logs' started by JaPeMo, 29 Jan 2016.

  1. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Hi!!!

    After looking for a new case with a lot of frustate ideas, I go to make and build my case.

    I like some cases but all have some problem or don't like some point. Looking in Google I look EK Vulture, and I decided built case like this with my modifications.

    Now I'm drawing in CAD program...

    First I put components with my taste.

    Option A

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Option B


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Problems...

    [​IMG]

    [​IMG]

    Ram waterblock do interference with push-pull option...

    I decide built Option A and I started yerteday to draw some sketches for frontal case...


    [​IMG]

    Now, some 3D pieces modelings with frontal option decided.

    Front cover (Acetal 7 and 10 mm with frost white logo):


    [​IMG]

    Back plate cover (aluminium 2 or 3 mm):


    [​IMG]

    And last, sktech for mount:

    [​IMG]

    Tomorrow I will draw back case.

    Kind regards...
     
  2. perplekks45

    perplekks45 LIKE AN ANIMAL!

    Joined:
    9 May 2004
    Posts:
    7,548
    Likes Received:
    1,786
    Subbed.
     
  3. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    I'm still working on parts , settings , etc ... it is no small feat and design all the pieces fit , but above all, make sure everything is fine, since once made ​​the piece can not go back.

    In another topic. As you know I'll put the inverted plate , that is, rotated 180 degrees, my question is related to the block RL . In theory having an input and an output by default and a position on the motherboard , either . So far so perfect, but in this case the plate is rotated , if the block is placed in normal position ( as a plaque in his normal position and not rotated ) , I'll have some cooling problem ?. So you understand , well , block 180 turned over the plate, as if the block put it upside down on a plate normally installed.

    Kind regards
     
  4. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Good evening or good morning could say almost ...

    Now I have almost finished 3D, missing lids and details of grommet and rear fan ...

    [​IMG]

    Tomorrow I hope to have it finished and send it to the budget ...
     
  5. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    3D model finished...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Regards
     
  6. Bartacus

    Bartacus Minimodder

    Joined:
    30 Oct 2014
    Posts:
    606
    Likes Received:
    13
    Subbed!
     
  7. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Hi friends

    Today I received somes budgets.... only letters and front acetal between 300-400€.... without aluminium...

    Perhap I bought case to do my project with some modifications. This weekend I will have all:

    Case...

    [​IMG]

    GPU...

    [​IMG]

    Waterblock...

    [​IMG]

    See you soon...
     
    Last edited: 2 Feb 2016
  8. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Hi!!!

    New component arrived!!!

    [​IMG]

    OMG!!!! Waterblock is a lot of bigger!!! FANTASTIC!!!

    [​IMG]

    [​IMG]

    LOL!!! This is the bigger GPU than I look at the moment...

    [​IMG]

    [​IMG]

    [​IMG]

    And case, pretty, pretty, pretty...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    After I presented GPU to take dimensions...

    [​IMG]

    I have free 103mm fron GPU to plate to install reservoir with 60mm diameter and 45mm thick rad... What will happen?...

    [​IMG]

    My idea is don't moddify case except do better air cooling or extra personalized panels

    Regards!!!
     
  9. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Good night or maybe good morning too

    After intense night...

    [​IMG]

    [​IMG]

    And the last, after UPDATE to last BIOS (0502) and I overclock micro to 4250MHZ with the options in AUTO... After install W10, drivers and...

    [​IMG]

    Now I go to sleep some hours and after go to work... Hard day and a lot of cofees...

    Regards!!!! :thumb:
     
  10. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Hi friends!!!

    Before I give new developments I have to thank the effort, patience and support they have given me from

    [​IMG]

    On the other hand, more packages arrived yesterday and today another two. With this, I can really having almost everything to present and organize the space ... Start!!!.

    From Amazon, the tool to bend the tube ...

    [​IMG]

    And from E22, samples of sleeve ...

    [​IMG]

    [​IMG]

    Since Highflow.nl, a regular store my purchases and which has on occasion sponsor, some samples of sleeve, a top Koolance COV-RP450 (Rev 2.1) and the reservoir body diameter 60mm and 200mm high ...

    [​IMG]

    And they rolled them together are so, I love ...

    [​IMG]

    Go to the Top and reservoir...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    And weekend near...
     
  11. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
  12. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Hi

    Today I continued dismount case and I found this...

    [​IMG]

    After I presented and installed components to look free space and position. In the first option. I installed reservoir in vertical position

    [​IMG]

    Second option, I don't like much with reservoir in horizontal...

    [​IMG]

    After, I installed grills

    [​IMG]

    [​IMG]

    Now, I changed ilumination panel with RGB led strip...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    This is all for the moment...
     
    Last edited: 12 Feb 2016
  13. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Hi, updates with waterblocks!!!

    [​IMG]

    [​IMG]

    I decided install serial backplate, I love it

    [​IMG]

    and RAM

    [​IMG]

    All waterblocks...

    [​IMG]

    GO!!! GO!!! GO!!!
     
  14. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Good night friends.

    After a while on Saturday and another little while today I show progress.

    The blocks in the MB and RAM

    [​IMG]

    [​IMG]

    We spent the copper chromed...

    [​IMG]

    [​IMG]

    My first tube ...

    [​IMG]

    [​IMG]

    It seems easy, right ... for the next 2 have led me all afternoon, it's not like acrylic, copper pipe involves not a step up, but 2 in a ladder ...

    [​IMG]

    [​IMG]

    [​IMG]

    And the last, with double curve provided, I sweated blood to finger ... not sting like scabies ...

    [​IMG]

    When I say that is 2 steps, I mean this ...

    [​IMG]

    I wasted tube, when you're wrong, there's no turning back. I have left, are supposed to be easier, but until it touches wood finish before starting it ...

    Regards!!!
     
  15. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Hi!!!

    Today my dremel had broken and I built manual plate to support radiator and fans.

    Tomorrow I will received more components to continue...

    Regards!!!!

    Enviado desde mi HTC One mediante Tapatalk
     
  16. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Hi!!!

    Yesterday I received some components to change and install. New reservoir from Aquacomputer, pump from EK, Top pump from Aquacomputer, heatpipes for pump from EK and last flow indicator from barrows

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    And now, I'm working in plate to fix rad and fans to case...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Now I go to continue working....
     
  17. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Hi again!!!

    Updates from this evening...

    First I presented reservoir and pump...

    [​IMG]

    Yesterday I bought polish and I used to do good finish to acryilic side...

    [​IMG]

    [​IMG]


    After, I installed fans and rad in support

    [​IMG]

    [​IMG]

    And last, in the case...

    [​IMG]

    [​IMG]

    [​IMG]

    I inserted a piece of pipe to look aligment..

    [​IMG]

    After studied some positions and circuit, I decided to do a new hole in reservoir...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    After polish, I installed for don't do cyclone... and fittings...

    [​IMG]

    [​IMG]

    [​IMG]

    Tomorrow I want build support for reservoir, pump and filter...

    Regards!!!
     
    Last edited: 26 Feb 2016
  18. JaPeMo

    JaPeMo What's a Dremel?

    Joined:
    31 Aug 2013
    Posts:
    94
    Likes Received:
    3
    Hi

    I was finish the reservoir support. It wasn't perfect, but I don't want spend much time, maybe I will do some tick to do good quality. It is very solid, more than I thought.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    I gone fast and crash...

    [​IMG]

    When I finished support I know that I done bad drills with wrong position, I do new drills and correct this without problems. Now are reversible...

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Now, I used fittings and adapters but I have pipe to install and look wich is more beautifull

    Regards!!!
     
  19. Reapervon

    Reapervon What's a Dremel?

    Joined:
    17 Aug 2014
    Posts:
    68
    Likes Received:
    0
    Subbed!
     
  20. IWantAnA2

    IWantAnA2 What's a Dremel?

    Joined:
    7 Mar 2015
    Posts:
    14
    Likes Received:
    0
    That's quality workmanship on that reservoir support. How'd you get such precise cuts by hand?

    Subscribed!
     

Share This Page