Scratch Build – In Progress The Razor's Edge

Thanks a lot

Today i finished sleeving the fan cables. I like the result of watering tubing a lot and i think ill adopt it in my future builds.






If you want to help me you can like or comment my thread on the coolermaster modding contest. http://community.coolermaster.com/in...9-razors-edge/

Cheers
Iraklis

 

Today i worked with the led controller cover. Unfortunately i wasnt able to fix the old controller and i bought a new one.





Tommorow i hope that ill be able to complete the cover.

If you want to help me you can like or comment my thread on the coolermaster modding contest. http://community.coolermaster.com/in...9-razors-edge/

Cheers
Iraklis

 

Thank you

After many tries i completed the most parts of the LED Controller. The only piece i miss is the top lid and it is ready. I also decided that ill have the controller outside of the case.









If you want to help me you can like or comment my thread on the coolermaster modding contest. http://community.coolermaster.com/in...9-razors-edge/

Cheers
Iraklis

 

Hello everyone.

Today i finished the LED controller, if everything goes by the plan tommorow ill fire it up for a test drive. I also started the painting of the case





Cheers
Iraklis


If you want to help me you can like or comment my thread on the coolermaster modding contest. http://community.coolermaster.com/in...9-razors-edge/

 

Today i painted the 1st layer of primer.

Ill continue tomorrow, with one more layer and sanding



Cheer
Iraklis

If you want to help me you can like or comment my thread on the coolermaster modding contest. http://community.coolermaster.com/in...9-razors-edge/

 

After a lot of sanding i managed to smooth and prepare the surface for painting.



Cheers
Iraklis

 

After many days of absence i found the time to paint the case. Today i did the first layer of the white paint with the paint gun. Unfortunately i am not that experienced with painting guns so i did some mistakes during the paint. Luckily though since that its the first layer of paint ill fix it tomorrow with some sanding paper.





Cheers
Iraklis

 

Yep there are several paint drops but coul be fixed

You should "charge" less paint in each point.
If the parts are not covered enough you can make a second layer later, once the first one is dry .

 

Thank god i fixed that today, i made 2 new layers of paint and i am waiting it to dry so i can make one more tomorow.

Cheers
Iraklis

 

After many days away i completed the painting of the case and now we are ready for hardware instaliation











Cheers
Iraklis

 

Woohoo, getting closer! Looks great!

 

After some days i found some time to do some more modding.

I used some L channels to hide the weldings on the radiator holder.



I also moved the case to my home and used some actual hardware to check if everything is working.





Cheers
Iraklis

 

That came out pretty cool. -Putting gear in the case and using it is a sure way to delay a project. Be warned.

 

Nice man
Do you have new pics with the mesh in place ?

2 years for my mod

 

No i dont have pics atm because, even though i completed the acrylic cover of the led/mesh bracket, i unfortunately break it and i have to do it again.

Cheers
Iraklis

 

Hello Bit-tech.

I am back after almost 2 years to revive this old worklog. To be honest i was never done with this build and i was really annoyed. Well the time has come and after almost 10 years i have decided to make a present to my self and buying a PC for me. The build is around i9 9900k with Z390 and RTX 2080Ti from aorus with the preinstalled waterblocks on them. I have ordered these parts but the availability is low so i guess it will take a month 100%

The watercooling is from EKWB and i have ordered the pieces and i expect them to be delivered @ 27/2/2019


Thats all for now. I will come back with more news.

Thanks
Iraklis

 

I warned you.
Good to see you back at it, though.

 

Damn, this is one of those long, lost gems. I had completely forgotten about it until I got an email notification. Glad to see you back

 

Thank you for your kind words.

Now some more shopping

 

Hello everyone.

After carefull consideration i decided to remove the color of the case. Tbh i wanst happy with the result and i decided to try for a more profesional result.

Meanwhile i took the chance and completed the holes for the grommets one the back side of the case.



I also recieved my order from EKWB and i hope that the next days ill be able to start working on the watercooling loop