Back on the build. Mounting the 16mm hardtubing in the pedestel this evening. When i finished it i thought "one step forward and 2 backwards". No nothing wrong with the mounting job but i have to ad a few things to the plan: - making a drainage tube to the back; - making shorter power harnes for the fans ( and remove the stock 8 way splitters) 10"to long. Bether then hanging soft tubing. I used 16mm hardtubing (2mm thick) and put 1\4"tread in. Tommorow i try to make som more and bether pictures. Custom made front.
I came back this morning from the firestation (extra shift). I slept verry good this time. This means that i still have the power for making a new part for the desk. I made a mountingplate for the drainage in the pedestel. I started to make a drawing in AutoCAD and after a few minutes the lights went on in my head "this is the way i thought". I made 6 toolpaths for the machine. The result is what you see on the pictures. I am going to make them matt black. One bad thing "my camera dropt of the chair when i wanted to pick it up"lucky only my sun cap is broken. Pffff. Ill be back soon 20:24 i couldn't wait so i made the second one before dinner. And because the paint dry verry fast i already painted them both.