Hi everyone! So, I'm planning a custom build and and I will need custom wiring for it. I've been asking around and here is a list of different wire connectors that I have been able to gather so far. Please feel free to add to the list in order to assist others. BTW, a big thanks to Big Elf for helping me with a lot of the connectors. NOTE - I'm not including links for digikey or mouser because I find their shipping to be way over priced.
Molex SATA connector numbers: Molex 67926-0001 SATA Connector, Punch-down type SATA power connector with latch Amazon link: eBay link: Molex 67926-0040 Cap, Feed-through cap for SATA power connector Amazon link: eBay link: Molex 67926-0041 End Cap, End cap for SATA power connector Amazon link: eBay link: Molex 67582-0000 SATA Connector , Crimp type SATA power connector Amazon link: eBay link: Crimps Housings *** NOTE - I have personally had better results with these crimp style connectors than the push down style. Female SATA data connector: If your looking at making custom SATA data cables, here are some links for the female tips that I have found: MODDIY PC: FrozenCPU: Performance-PCs: *** BiG Elf also gave me these part numbers, but I have only been able to find them on digikey and mouser Molex 67581-0000 SATA Pin (Molex 67581-0001 for gold plated)
Molex ATX/EPS connector numbers: 20-pin ATX male power connector housing Molex Mini-Fit Jr 39-01-2205 Amazon link: eBay link: 24-pin ATX power connector housing Molex Mini-Fit JR 5557 Amazon link: I can't seem to find the 24 pin connector on Amazon. If someone finds one, please let me know and I'll link it. eBay link: ATX 24Pin to 24Pin 90 Degree Power Connector Adapter Amazon link: eBay link: EPS12v 4 pin connector housing: Molex 39-01-2045 Amazon Link: eBay link: EPS12v 6 pin connector housing: Molex 39-01-2060 Amazon Link: eBay link: EPS12v 8 pin connector housing: Molex 39-01-2080 Amazon Link: eBay link: Molex 39-00-0038 ATX Female Pin Amazon link: eBay link: Molex 39-00-0040 ATX Male Pin Amazon link: eBay link:
Molex Fan pin connectors: Molex 08-50-0114 Fan pin crimp Amazon link: eBay link: 2 pin male connector housing Molex KK 254 2 pin - Molex 22-01-2025 Amazon link: eBay link: 3 pin male connector housing Molex KK 254 3 pin - Molex 22-01-3037 Amazon link: eBay link: 4 pin male connector housing Molex KK 254 4 pin - Molex 22-01-3047 Amazon link: eBay link:
Molex tools: Molex 11-03-0044 ATX Pin Remover Amazon link: eBay link: Molex 63811-1000 Hand Crimp Tool Amazon link: eBay link: *** The genuine Molex crimp tool runs about $50.00 USD. I'm using a Iwiss SN-28B ratcheting crimp tool that I paid $21 USD and I'm getting great results. https://iwiss.com/product/sn-28b-dupont-terminal-ratchet-crimper/ Amazon link: eBay link: "There's a Molex punch down tool available for the Punch down Tool (0638133503) for SATA connectors but a CR-V 4 screwdriver bit is a lot cheaper and just as effective." (source Big Elf)
Japanese Solderless Terminals OK, this one isn't that common on motherboards, but the board that I'm planning my build with uses them for fan headers. Apparently, they are commonly used for battery connectors for model airplane, drones, etc. Pre-assembled wires Amazon link: eBay link: 4 pin housing connector: Amazon link: eBay link: Crimp pins: Amazon link: eBay link: