Photos Your Room and Computer

Totally not my photos and stolen from the RMC discord server (link: https://discord.com/channels/431348664489738251/628458346365845524/774973597793779732 EDIT: Scroll down a bit for these actual photos) - this is from a Multiscan 200ES, and I have a Multiscan 210ES:









It probably won't be easy though...

 

That looks like it's as easy as peeling off a plaster!

I hope it is but I feel it won't be quite that easy.

 

There is only 'one' corner desk, but you'll need to hit up ebay as Ikea stopped making them, you need a Galant or 2

 

Ah ha. Yeah i had a brief scoot around old forum posts and that seemed to get mentioned but assigned to history now.

I may check out some ex office stock as well - there may be something there. Although, come to think of it, one that needs assembling maybe the only way it gets into the loft.

I mean I could make one I guess.

I just need time. Materials. Talent. Oh and ability.

 

I ended up placing a big order for some "kee klamps" piping and fittings in oder to make a custom desk. Wanted something in a very specific size (120cm wide) and with a top shelf, and shlf above monitor, so I figured just DIYing it was the best way to go.

Now I just need to source the actual desk-top (and also the shelves). Any good options other than Ikea/lumber yard?

 

Messed this post up

 

So long story short, I built a second Ryzen Rig and moved my other parts onwards. I also decided to pull the plug on watercooling and I am just waiting for the EKWB FTW3 Block to arrive in March to complete the loop.

I am not a RGB fan, so chose a classic (if over done these days) black on red. I spent a good number of hours on the WC loop design, with the goal to keep the loop as simple and small as possible. I used Xflow Rads to help with this along with some tight (but not too tight) connections in the loop. I hope from the images you can see when the GFX block arrives how it will fit into the loop. I ran the loop for 48 hours prior to building.

























Kit List:

Part Model
CPU AMD 5900x
Motherboard X570 AORUS XTREME (rev. 1.1)
Memory Trident Z Neo DDR4-3600MHz CL16-19-19-39 1.35V 32GB (2x16GB)
Memory Trident Z Neo DDR4-3600MHz CL16-19-19-39 1.35V 32GB (2x16GB)
SSD Inland Premium 2TB SSD 3D NAND M.2 2280
Graphics EVGA GeForce RTX 3090 FTW3 ULTRA GAMING
PSU Antec TPQ-1200 1200W Continuous Power
RAID Controller RS25DB080
RAID ARRAY Raid 6 x5 3.5 Drive WD Black 4TB 7200 RPM SATA 6Gb/s 128MB Cache 3.5 Inch - WD4004FZWX
Case Thermaltake View 71
Riser Cable TT Premium PCI-E 3.0 Extender – 300mm
Fan Six Noctua NF-F12 PWM chromax 120mm
Fan One Thermaltake 140mm Ring RGB
Braided Cables EZDIY-FAB PSU Cable Extension Sleeved x2
CPU Block EK-Quantum Velocity RGB - AMD Nickel + Plexi
Res and Pump EK-Quantum Kinetic FLT 120 DDC PWM D-RGB - Plexi
Tubing EK-Tube ZMT Matte Black 15,9/9,5mm
Fittings - Various EK- Quantum Torque STC-10/16 - Black Nickel
Front Rad Alphacool 14230 NexXxoS ST30 Full Copper X-Flow 360mm
Top Rad Alphacool 14235 NexXxoS XT45 Full Copper X-Flow 360mm
Coolant EK-CryoFuel Clear (Premix 1000mL)

 

Decided to finally get round to tidying it all up after neglecting it for far too long!

 

Looks good, but itty-bitty pictures ...

 

Probably far too big now

 

nah, just right. (and .. I have the same speakers)

 

for the price they were, they are cracking little speakers, although I have an urge for something much more powerful soon

 

Here's my current setup... It's not very clean or tidy, but I know where everything is...

 

hey thats the same desk as mine above! the IKEA Galant, plus a white fractal, although mines the R6 not a Meshify and im jealous of the KRK's i'd love a pair of them one day

 

Dunno if you can see but I'm also running an EVGA 1080 FTW2, whats the chances aye!

 

far too many similarities here.... although i have removed my 1080 for a 3090FE i finally managed to get a couple of days ago

 

Nice setup, and yours is far cleaner and tidier than mine hah! Just reminds me that I really need to get some kind of drawers or something so everything isn't on the desk....

 

So you're saying it's possible, but you might need to update your Tetanus injection.

 

Moved back to an ATX build so I could actually fit in a more powerful GPU (that was available). Ended up getting a pre built with the right spec, at the right price, that I could tweak with already owned parts.



Also for reference, this is the new GPU with a NZXT H1 for scale:

 

Still not happy buy damned sick of re-arranging and re-wiring my desk now!



I think I'm going to move the mixing console over to the right, as that'll give me room to have my work latop docking station over on the left...