amazing pics, first time i have seen the window the other side (and making a good clean job of it) - S
Curses...I suppose I'll settle for not being first for the outside window idea... ...Zap's AMD Shuttle did the outside window, I saw it in person at Quakecon, it was really very nice. It's where I got the idea.
Has anyone put some LED's in an outside window? By that i mean into the outside edge so the whole lot lights up with the perspex acting like a prism. Could be a good mod
Like it two that you put the window outside the case Dude, what cooling are you going to use? water air etc..?
Air will be used at first. Water down the road. When I get the water stuff I will remove the HD bay at the bottom and insert most of it down there. Now I am moving to the inside of the case while I wait for some more stuff.
Small update Worked on the front intake. First I measured a center point and drilled a starter hole. Next I drilled a hole for the 92mm fan hole. Then I screwed on the ring for a quick look. Then I installed the fan with spinner on the middle. Also I repainted the hose so the inner area was black and not blue like before.
Sweet sweet. I'm going to do something smiliar on my LI. Did you lose the Power/HDD activity leds by mounting that there? I plan on moving the 120mm fan up there as well and when I do I'll have to nix that. Also like the idea of the shower hose as well. Again I have something similar planned but with clear tubing and 6 holes drilled. Great minds do indeed think alike. BTW. It looks like you did some work in the front drive cage area. What are those 3 bolts for?
The power and HDD led will indeed be mounted elsewhere. Although where exactly is still being weighed. I bought some chrome led holders for where ever I end up mounting them. When I mounted this I could have moved it up to keep the front usb, etc ports but I have no use for them so I decided to put it as low as possible to cover this area instead. Even with that I still had to lose at least the HDD activity led. So I finally decided to lose both on the front all together. Leaving only the switch. The 3 bolts in the drive area are to hold some wire mesh that will cover the area below it from the windows view. The window design shows a small area of the bottom on the left and really there is nothing there to see. (The last picture above shows this) So I wanted to mount something that let light shine through, but would not really grab your attention. So above you are seeing the bolts, but I have not yet added the mesh in that picture.
This is so smart, the chrome rings from mnpctech really do give it some class Keep it up, you're setting standards for us all