I'm really on the fence this time.
Usually I would be upgrading now, but I got a sim only contract this time with the thought of just buying the...
2 questions have arisen with this report maybe you know the answers:
1. Why do I need to see what my PSU is doing on my mobile phone away from...
Any chance of you guys doing a review of the Kelvin coolers.
Would love to see how they stack up against the other runners.
So a friend of mine is building a custom case, Think small mobo, custom alu housing, perspex tube etc.
Problem is that the PSU wires are...
I've recently tried some 7 o'clocks, very impressed!
Haven't they already made a reversible version of the current plug
Like so: http://reversibleusb.com/
Why do we need a new connector?
I think they must be sata 1 they sure are old enough!
What do I need to run in hdtune? What am I looking for?
No they weren't set up in a raid, but they have followed me over 3-4 different motherboards.
So I have a pair of maxtor 150Gb discs which seem to be playing up. They hold data ok, but randomly when accessing them they go to 100% active but...
So, I've got me an SSD but of course the screw mounts place the drive in a different place so the sata and power plugs don't line up with my...
So I did a bit more tonight, Not the USB plugs this time, just the Mobo Aux power leads.
The power supply came with an 8 pin aux power and a...
Not a bad idea, I'll give it a go later
Sorry about that guys. I just didn't like it that much. It's good but not as good as I wanted.
Anyway. I still need to sleeve the atx plug and...
I have managed to cut myself a couple of times, the worst bits are the Sata pass through plugs. You really have to make a hole in the side...
So, Next I did the Front panel connectors.
I removed the wires for the fan controller as I'm just not using them and they cluttered it all up....
Ok so here goes, I've not done one of these before But I thought I would have a stab at it!
I originally had a Tsunami dream case and was not...
So I got 100 Ft, its done all the extra wires other than the ATX wire and there is lots left. So, in short I would recomment 100ft for a full rig.
Thanks krikket and next, I thought it would be a quick answer really.
I have done a bit of looking elsewhere and found out that 50ft won't be...
For those who are interested 50ft will be a bit short. Atx cable could easily use up 12m, once you add the other wires in it will go over 50ft
I was hoping to draw on the vast experience of bit tech for a rough answer. I understand the idea of measuring and multiplying by the number of...
Separate names with a comma.