Couple more pics.
In the top space. The D Drives and my wireless on/off switch and light controller, works through my Vera home...
The front aspect is now pretty much finished, Still a bit of work to do round the sides to enclose what I want enclosed.
For info 2mm plexy bends fine at this curve not much force at all.
Ok you can't see much cos it's see through. But it...
A question guys, how thin a sheet of acrylic at about 480mm by 350mm to bend round at about 410mm radius. Without undue force
for the front of...
Some pics of my HDD Mounts. each for a 3.5 and an ssd on top
Could not wait any longer to see if all the bits worked. They have all been sat around for a while now. Anyway after formatting the...
My brother reckons if I had an explosive leak it would look like Bishop being ripped apart by the Alien queen :geek:
fixed pictures, hopefully
should always go to Dropbox for picture sharing.
Very odd, I have tried on 2 computers, one at work and I see the pictures. I will redoo the post when I get home.
Hi Guys my updating skill is lousy, I have been slowly completing my project. There have been some changes and re-doos, I have moved...
Here are some update pictures. I managed to kill my printer so that's put a cramp in things. A new one ordered (ummm new toys), so...
Ok noobie question, more a general question, how do you edit the title? I have tried all the buttons and nothing seems to let me change the very...
Closest would probably be the 3Doodler
The other option would be to use car repair paste like Bondo and paint it...
Aaannnnndd 6 hours 48 minutes later mk 2. much better.
Just needs a good tidy up.
Picture of the two parts of the PSU support backplate fitted.
I printed a middle section, just under 7...
Yes I must admit I chickened out on the reservoir. But I already have the XSPC Photon Tube sat in its box. My early early plans did have a custom...
Hi guys, been awhile since I built my last PC and it's getting a little tired. The new one has been in planning stage for aaages, but finally...
As Sulu once shouted, Shields !!!.
You may also want to consider a solid or mesh metal cover for the PC motherboard as the CNC equipment can...
If you want to run the fans slower but not at 5V you can skip the big resistors and just connect between the +5V live and the +12V line of your pc...
Would be good, Diamond is 2 to 6 times a better conductor of heat than copper, bitch to mill though.. Maybe you could grow it :)
Separate names with a comma.