first of all, sorry i have no updates at the moment
my study is too time time-killing... :waah:
in january i have my tryouts and then ill...
but to continue with the project i still need some money for a new saw blade...
but i can show you why the project was...
first of all thank you :)
no im not infected with the "T" virus :D
the main reason at the moment is the oktoberfest in munich...
that is definitely the greatest compliment i have ever read :D :D
thats my opinion too
as i wrote i have no digi cam at the moment, but i borrowed one of a friend of mine
here are some pictures after all being...
im back :D
just working on an new res
these are the last pictures i have
the res is now...
yes its uv-plexi orange
i bought it in a normal home improvement store in germany
as i wrote it will take a while
i still need some parts, some for the pumps some to get a good lightning
if all is...
i think ill try both when its all finished
i dont want to melt it ;)
btw. the temperature to melt PMMA XT is over 130°c,...
the temperature ist 80°C and one hour for every mm material
in that case it was 5 hours
then never open the oven abruptly
the material has to...
after the drilling and cuting the plexiglas is very brittle
if you glue the material without this step the plexiglas...
this is my actual nearly finished projekt: ceramic
i started it in 2004 and after a long break i continued the last days
it ist build of...
its not from acryan
i buy all my plexiglas from a local company
ja, alle plexiglas arbeiten...
i have a big update
first i got my new 7900gt card, and a black ice 2 pro
here is the new black ice, and the aquastream in the case
at the moment i am working on some al parts and the case itself
but the main reason was a hardware update of my main...
thanks :) :)
with this block i wanted to try something new
in this cooler the channels are perpendicular to make some...
i am back :D
i a few posts ago i showed you my problems with the case
i got a new one but this got some ugly dent too
so i only use some...
yes, that would be possible, but i dont think ill change it
there are still so many things to do...
no big update but it was a lot of work :dremel:
now the logo is glued, sanded and polished
this is the best i could do, only with a hand saw......
that would be awesome ;)
Separate names with a comma.