I have always used CCCP
Havent had time to test myself - does anyone know how the Start Screen looks on multi-monitor/eyefinity?
While it does look nice - I agree a single crisp image is prob better than 2 crap ones - I imagine viewing angles are limited as well
Spending £800 on a GPU and only getting 2GB per core seems silly
DSM 4.0 is quite awesome .. very user friendly
Out of all the pre-built NAS - I think Synology is the most expensive though - but worth it
Dont these run quite hot once u overclock?
It does look kinda epic
FreeNAS/Openindiana both support NFS and can use the Napp-it
NFS is extremely good for home level data protection - there is plenty of...
Looks like a nice setup - did u get the monitors for the 120Hz as u dont seem to b using 3D?
Do u need a 3rd card to run the 4th monitor?
From what I found (X3: Reunion + TC) they are both very similar, so if u want to understand the whole plot line start early, if not go for the...
No luck on almost everything, 2 kits should play together shouldnt they?
I will try running at 1333 with a higher voltage and see if that works - the new memory seems to pass a 150% test with memtest
They were set at 2T - running a longer memory test with just the new sticks now
All sticks pass the memtest86 v4.2 with no problems - just it...
An overnight test shows it failed on the 'failsafe' options in bios - I will double check the options used and test again accordingly ... looks...
About 2 weeks ago, I built a sandy bridge rig using a 2600k and a gigabyte z68x-ud3p-b3 mobo (F6 bios)
The rig had 8gb ram and was not currently...
Very tempted to get 1 :)
Ati 9500 Pro
Asus 260 SLI (216 Core)
Zotac GTX 570
Zotac GTX 570 (SLIed)
ATI Radeon Xpress 200M...
Best - Q6600 - Overclocked nicely, lasted ages, especially in computer terms
Worst - The first that comes to mind is the sentry 2 fan controller...
I was looking at these for the main fittings:...
So this would be the correct height?
also is it recommended to use an...
Separate names with a comma.