I suppose your drawings are accurate (especially the fans orientation).
In my opinion you have a problem with your air flow.
The hot air is...
The door is marvellous
Thanks for the confirmation
You are right, it is my misstake (i correct my post immediatly), But you can't deny you are supporting alphacool and phobya more than others and...
Aquatuning have links with alphacool and owns phobya. Now they have a complete range of products they want to get rid of a concurrent.
Top cut pattern :
New rendering (aproching build phase :))
The case is smaller and smaller :
right to left : Original case, First resized version, current project, TJ-07
A picture of the airflow in the case.
The ideas are :
- to have a very simple and straightforward air flow.
- the radiators participate...
I will repost them later.
In the next weeks i will redisign flows i found while putting the build together in reality. I will post new sketchs...
Hello every one (sorry for my english), i took new photos of my build.
I have rebuild the case from the new sketch.
Sorry for the ugly paint and...
The case i am building :
It's not final, i will do a little more cable managment later.
I have to make hdd bays in the lower chamber and little insulated boxes for...
I will make a window in the left panel and a little door for the 5"1/4 bay in the front panel.
New photos !
I glued 2cm thick foam panels on the sides and the top for soudproofing.
I'm going tu measure the voltage output of my motherboard myslef.
I will tell you the results.
Thanks for the help.
A guy on another forum measured 4,89V on his motherboard led output.
I think i have to had a resistance on one of the led wires.
I just finished to wire twot bulgin led switch buttons :...
New photos. It's not finished but i already pleased with the result.
I need to do cable management :
Separate names with a comma.