I'm sorry, I hadn't checked this thread in a while: @Digitalize-: I am 100% aware the mouse doesn't look as good as it would do straight out of...
Quick update on progress - I'd say about 1/2 way through now I lined the motherboard tray and the upper section (the section which holds the...
I was planning on taping/gluing it to the side panel as there's little room to make a custom surround for it so I'd have to be able to hoover it...
I need some pretty custom sizes here, any idea where I can get some? Ideally in 1m lengths so I can cut to size and what not
If I can do that to my G15 anyone can =P just requires a steady hand with a soldering iron I've got a domain name and hosting sorted out so I'll...
Ok well I marked out and cut hte motherboard tray for some better cable management when I do finally get the case done: [img] Before cutting...
Braiding: For this I used a sunbeam PSU modding tool set thingy & some white braid and heatshrink (can't remember the sizes, when the logs...
This mod is sponsored by: [img] Great thanks to Tom for setting this up. (use of on-site CNC cutter) [img] Great thanks to Tobias...
hehe I'm not as n00b as I sound ;) I've found another little circuit with some help from another forum that should work and it runs on 5v so...
The problem with an IR LED and detector is that I wont have anywhere to put the IR led, as I want to wave my hand over the top of the pc to turn...
here's the scenario I want to be able to turn my pc on and off by waving my hand above the front of it reading into it I need a PIR sensor what...
I forget to take that part out >.< yeah the finished pics were in the competition that I came second in (unfortunately no prizes for second place...
I know yellow tint is incredibly hard to find I managed to get some from these guys: http://www.plasticonline.co.uk/ I had to email them...
Yeah all these images are shrunk from 3264 x 2448, I don't think forums would like it if I started uploading those :p give me an email if your...
I was wondering if anyone had this case and could tell me if you can fit a triple rad facing downwards in the lower compartment if I remove the...
thanks no I've not noticed any peeling of the vinyl, it's stuck on pretty well so
BUMP
Well this is my next project, still in design stages at the moment I don't want to start before my exams as I need good grades and this would get...
SAY WHAT?!? VASELINE? ARE YOU MAD BOY??!? Well actually the Vaseline stops the drill bit heating up too much (the Vaseline melts and lubricates...
Well Really it's a complete case build for a media centre in some A3 sizes of Perspex. This mod is sponsored by: [img] The Memory Experts Great...
Separate names with a comma.
