My daughter needs a computer. This means I upgrade my computer and then make her something with the leftover parts or I just build myself a new...
doesn't the amount of current going through the base to the emmiter flow a proportional but larger amount of current through the emmiter and...
would the circuit that I came up with work?
This is what I came up with. Could I use a circuit like this?- [IMG] I would adjust P1 until the load had it's minimum required power and...
I need a voltage source controlled by a 0 to 5 volt input. The source must run on 16.5 volts dc, the minimum and maximum voltage must be...
go to youtube, put "krugtech" in the search and check out the van
I'll miss that thing, I put a lot of work into it, but it has to go so I'll have the room and the money to get THIS! I'm not sure what I'm...
it depends on the battery and the wiring, your estimate is close. The highest load I've come across is an electric winch, they're good for a few...
glad you all like it. I printed one panel out in draft mode and stuck it to the aluminum with spray adhesive and used it as a guide to make all...
Hey my brothers, here's what the noise in my workshop was all about. I made this for my car computer. It's the control panel, it will go where the...
I've been researching this whole LCD thing, here's what I've learned- I'm a cheap SOB for one, but I already knew that. Whatever you start with,...
This place is like a support group for modding addicts.
My buddy Dave came over with all these capacitors, next thing I know he has the cover off my fuse panel and there's wires all over the...
I'm a yankee living in Georgia, I hope to someday become a Georgia Dawg myself. I've been here 7 years and I'm told I'm ALMOST a redneck.
There's a whole group of people who like to play with turbines. but I think they just use it as an excuse to play with fire. Here's where we all...
Here's me modding a monitor with a potato. That sparking was the first time I saw that monitor actually do something. The potato gun is heavily...
Thanks Pygobombe. That's my home made jet go-kart. It does 70 mph in the 1/4 mile, it cost me $200 to build it. My wife was really pissed after...
I wanted to post some video of some of my destruction but I can't find a host. I tried movie-host.net. I got a video on there lableds 100 pound...
I faked it with some majic markers and once with machinist blue
this panel doesn't have HSYNC and VSYNC, that's connections 3 and 4 on some other toshiba panels, on this panel the say not to connect them. I...
Separate names with a comma.
