While the side was off, I decided to finally paint my biege DVD drives black. My fancy cardboard spray booth: [IMG] All the biege is...
Minor Repair Well, my bright idea to glue the perspex to the case worked for a while but the other day it fell off. So, stealing ideas from...
Wakeonlanlirc Check out http://markh.de/wakeonlirc/.
85% Done Finally managed to do some work on the case. Excuse the crappy images, I'll borrow a better camera, when it's finished. It's...
Right, another small update. Added some black rubber trim to the top blowhole. This hides the not so perfect circle I cut. :D Sorry for...
The case is back from the powder coaters. For NZD$30 this is the result (excuse fingerprints, dust, and crappy photo). I only got the outside...
The front panel is now clear coated, still have to buff it etc, but looks good in real life even now. [IMG] Again, hard to get a good shot...
Good plan, but I swear that this is the last time I'm taking this power supply apart. It is hard to get a good photo of a shiny surface, but...
Sorry for a lack of updates as "Real Life" tm got in the way. I think that I've finally finished all the cutting and drilling. I hope. I've...
As this case started out as an AT case, there is no rear fan. Lets fix that. The rear of the case is not flat, so I had to make two little...
QUOTE=CaseyBlackburn]Very nice, I like seeing these old case mods. Im gonna subscribe to this now. Another thing, is it just me or are those USB...
OK, First things first, lets paint the powersupply. [IMG] That's much better. For those of you following this, my original plan was...
Not much of a mod today, but got a Raidmax 400W power supply (+12v @ 18A, +5v @40A). More than enough for my needs, but it came with "Yate Loon"...
Not a big update today. Painted the front panel black. About 7 coats of paint, and rubbed back each time. [IMG]
Another talking to myself post :D This case only has one 3 1/2" bay and I want to put a fan controller in the front. So, where should the...
Today was a cutting day. First off, cut out the front panel metal to allow the LCD to mount on the front bezel. As usual, covered the rough...
Today I cut the hole out for the LCD. It's off centre so that the orignal locking mechanism for the case side panel and front door can still...
Spent some time tidying up the motherboard I/O area. Put in a piece of metal over the old extra plug cutouts, and then bondo'd it. Also put in...
Today I filled in some of the ventilation slots on the front panel and gave it a quick tidy up. It's nowhere near finished on the front yet,...
Added a 80mm blowhole at the top, and a 120mm hole for an intake fan at the bottom. Still some cleaning up to do, and obviously I'm going to...
Separate names with a comma.
